How to check the PON port traffic through commands on the MA5680T/MA5800T?

Hello, friend!

You can run the display port traffic command to view the traffic.

To query the current traffic of GPON port 0/3/0, do as follows:

huawei(config-if-gpon-0/3)#display port traffic 0                                

{ <cr>||<K> }:                                                                  

  Command:                                                                      

          display port traffic 0                                                

 ----------------------------------------------------------------

  Traffic Information

 ----------------------------------------------------------------

 Up traffic (kbps)          :  0

 Down traffic (kbps)        :  0

 ----------------------------------------------------------------

 Traffic of upstream broadcast frames(packets/s)    :  0

 Traffic of upstream multicast frames(packets/s)    :  0

 Traffic of upstream unicast frames(packets/s)      :  0

 Traffic of downstream broadcast frames(packets/s)  :  0

 Traffic of downstream multicast frames(packets/s)  :  0

 Traffic of downstream unicast frames(packets/s)    :  0

 ----------------------------------------------------------------

 UP bandwidth occupied percentage                   :  0%                       

 Down bandwidth occupied percentage                 :  0%                       

 ---------------------------------------------------------------- 

Thanks!