Hello! You can follow the steps below：
Step 1 Log in to the local device as user admin.
Step 2 Run the show hyper_metro_domain general command to check whether the HyperMetro domain is configured with third-party quorum servers (whether Quorum Server ID has values). Record the ID of each HyperMetro domain configured with third-party quorum servers and then go to step 3.
Step 3 Run the show hyper_metro_pair general |filterRow column=Domain\sID predict=equal_to value=HyperMetro domain ID (obtained in step 2) command to obtain the number of HyperMetro pairs. If "No matching records" is displayed, go back to step 2 to obtain the ID of the next HyperMetro domain configured with third-party quorum servers.
Step 4 Run the show hyper_metro_domain general domain_id=HyperMetro domain ID (obtained in step 2) command to query detailed information about the HyperMetro domain. If the Standby Quorum ID field does not have a value or does not exist, perform step 5 to 10 for the primary quorum server. Otherwise, perform step 5 to 10 for both the primary and secondary quorum servers in the HyperMetro domain.
Step 5 Run the show quorum_server_link general server_id=Quorum server ID (Quorum Server ID or Standby Quorum ID obtained in step 4) command to obtain the values of Link Status and Local Port for the quorum link.
Step 6 Run the show port general port_id=Local Port (obtained in step 5) command to obtain the values of IPv4 Address and Subnet Mask for the port, and record the obtained values as IPv4AddressA and subMaskA. Alternatively, record IPv6 Address and IPv6 Prefix Length as IPv6AddressA and IPv6PrefixLenA respectively.
Step 7 Log in to the remote device as user admin.
Step 8 Run the show hyper_metro_domain general domain_id=HyperMetro domain ID (obtained in step 2) command to query the ID (Quorum Server ID or Standby Quorum ID) of the third-party quorum server that is used by the same HyperMetro domain.
Step 9 Run the show quorum_server_link general server_id=Quorum server ID (Quorum Server ID or Standby Quorum ID obtained in step 8) command to obtain the values of Link Status and Local Port for the quorum link.
Step 10 Run the show port general port_id=Local Port (obtained in step 9) command to obtain the values of IPv4 Address and Subnet Mask for the port, and record the obtained values as IPv4AddressB and subMaskB. Alternatively, record IPv6 Address and IPv6 Prefix Length as IPv6AddressB and IPv6PrefixLenB respectively.
