how to check UDP packet loss on switch

Created: Dec 22, 2018 11:37:17Latest reply: Dec 31, 2018 22:53:22 387 12 13 0

【Problem Description】

  • Port 1 and Port 4 of Huawei switch isconnected to CPE1 and CPE2.

  • For the application to work properly, bothCPE1 and CPE2 send out PDUs at every 2 second interval to headend controller,and ever 3 second interval towards the branch.

  • The PDUs are sent out on Port 4790 as UDPpackets.

  • We are facing frequent disconnection inapplication.

  • Can you please diagnose and confirm whetehrthe PDUs are getting forwarded or blocked on the switch.


【Problem Analysis】

As my checking, the switch is just a L2 switch

And there is no mac-address flapping records on this switch.

=======================================================================

  ===============display mac-address flappingrecord===============

=======================================================================

Info: The MAC address flapping record does not exist.

 

And I want to know whether there is ip-address for the UDPpacket? If yes, we can do traffic statistic to check; if not, we need capturepacket to confirm it is forwarded or blocked by switch.


【Root Cause】

this is just customer query
【Solution Description】

tell customer how to test the problem:

whether there is ip-address for the UDPpacket? If yes, we can do traffic statistic to check; if not, we need capturepacket to confirm it is forwarded or blocked by switch.

  • x
  • convention:

Skay  Visitor   Created Dec 22, 2018 13:51:57 Helpful(0) Helpful(0)

hi author , can you give us some detail steps for commands , so that i can make the same test in the lab or customer live network in the future .
If yes, we can do traffic statistic to check; if not, we need capture packet to confirm it is forwarded or blocked by switch.
also how to do traffic statistic and capture packet ?
  • x
  • convention:

Finn92  Visitor   Created Dec 22, 2018 17:45:50 Helpful(0) Helpful(0)

i think skay saies right , we need more knowledge so that we can troubleshooting for proving our device is normal .
  • x
  • convention:

wissal  Visitor   Created Dec 23, 2018 01:49:52 Helpful(0) Helpful(0)

Detailed description of the problem and how to solve it, helpful.
  • x
  • convention:

yechao99     Created Dec 25, 2018 10:46:01 Helpful(0) Helpful(0)

helpful for us ,next time will be pass easy
  • x
  • convention:

GongXiaochuan  Visitor   Created Dec 26, 2018 09:54:55 Helpful(0) Helpful(0)

for customer issue about "Can you please diagnose and confirm whetehrthe PDUs are getting forwarded or blocked on the switch" , could you please share more details about how to check this
  • x
  • convention:

Good Good Study Day Day Up
Torrent     Created Dec 28, 2018 11:48:44 Helpful(0) Helpful(0)

tell customer how to test the problem:

whether there is ip-address for the UDPpacket? If yes, we can do traffic statistic to check; if not, we need capturepacket to confirm it is forwarded or blocked by switch.

thanks for shaing
  • x
  • convention:

lizhi94     Created Dec 29, 2018 10:00:05 Helpful(0) Helpful(0)


the phenomenon is so strange i also want to know
Port 1 and Port 4 of Huawei switch isconnected to CPE1 and CPE2.


•For the application to work properly, bothCPE1 and CPE2 send out PDUs at every 2 second interval to headend controller,and ever 3 second interval towards the branch.


•The PDUs are sent out on Port 4790 as UDPpackets.


•We are facing frequent disconnection inapplication.


•Can you please diagnose and confirm whetehrthe PDUs are getting forwarded or blocked on the switch.

  • x
  • convention:

SupperRobin  Visitor   Created Dec 29, 2018 11:28:21 Helpful(0) Helpful(0)

If the IP addresses of ARP packets on the control plane match the IP addresses in a basic or advanced ACL, these ARP packets can also be captured.
When the CPU usage is above 80%, executing this command will keep the CPU usage increasing.
The packet capture configuration is not saved in the configuration file, and becomes invalid when packet capture is complete.
Different packet capture instances cannot be executed simultaneously. That is, a new packet capture instance can be executed only when the previous one is complete.
  • x
  • convention:

littlestone     Created Dec 29, 2018 19:11:59 Helpful(0) Helpful(0)

UDP is the abbreviation of User Datagram Protocol. Its Chinese name is User Datagram Protocol. It is a connectionless transport layer protocol in OSI (Open System Interconnection) reference model, providing transaction-oriented simplicity.
  • x
  • convention:

12
Back to list

Reply

Reply
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Fast reply Scroll to top