This post was last edited by wangjun188 at 2018-12-11 02:03.
This post was last edited by wangjun188 at 2018-12-11 02:03.
This post was last edited by wangjun188 at 2018-12-11 02:03.
1. Download the USM installation tool and go to the \00_AutoInstallTool\upgrade\ini\ (in the CGP+RH2288 scenario) or \00_AutoInstallTool\upgrade\ini\VMWare\ (in the VMware+COTS scenario) directory.
2. Use the Notepad to open the common_after.xml file and the xml script used for the corresponding scenario, search for 10.10, and change the network segment to the desired one, such as 20.10.
3. Use the installation tool to install the USM.
4.After the USM is installed, log in to the OMU VM, run the cd /opt/pub/software/UPORTAL2800/Actual version number command to go to the /opt/pub/software/UPORTAL2800/Actual version number directory.
5. Run the vi setup.sh command and change internal IP addresses.
70 #Local NFS IP address 71 NFS_ROOT_IP="10"
Change network segment 10 in the preceding information to the actual network segment, which is 20 in this example.
6. Press Esc and run the :wq command to save the file and exit.
7. Log in to the HUAWEI Operation & Maintenance System and select the USM NE.
8. Under the USM NE, run the LST MODULE command and record all VMs that contain PMU and JMU processes.
9. Select the CGP NE, run the STR INSTVM command, and reinstall the VMs recorded in 8.
In the CGP+RH2288 scenario:Select the CGP NE, run the STR INSTVM command, and reinstall the VMs recorded in 8.
In the VMware+COTS scenario:Reinstall the VMs recorded in 8 on the VMware.
