Got it

How to change the negotiation and duplex setting of port?

Created: May 28, 2019 11:59:34Latest reply: May 28, 2019 12:00:28 105 1 0 0
  Rewarded HiCoins: 0 (problem resolved)

How to change the negotiation and duplex setting of port?

  • x
  • convention:

Featured Answers
All_About_Switch
Official Created May 28, 2019 12:00:28 Helpful(0) Helpful(0)

Hello!

You can configure the duplex mode of an Ethernet electrical interface working in either auto-negotiation or non-auto-negotiation mode.

• Configuring the duplex mode for an interface in auto-negotiation mode:

1. Run system-view. The System View is displayed.

2. Run interface interface-type interface-number. The Ethernet interface view is displayed.

3. Run negotiation auto. The Ethernet interface is configured to work in auto-negotiation mode.

4. Run auto duplex { full | half }*. The duplex mode is set for the Ethernet interface. 

By default, an Ethernet interface negotiates the duplex mode with the remote interface.

• Configuring the duplex mode for an interface in non-auto-negotiation mode:

1. Run system-view. The System View is displayed.

2. Run interface interface-type interface-number. The Ethernet interface view is displayed.

3.Run undo negotiation auto. The Ethernet interface is configured to work in non-auto-negotiation mode.

4. Run duplex { full | half }. The duplex mode is set for the Ethernet interface.

By default, the duplex mode of an Ethernet interface is full-duplex.
View more
  • x
  • convention:

All Answers
All_About_Switch
All_About_Switch Official Created May 28, 2019 12:00:28 Helpful(0) Helpful(0)

Hello!

You can configure the duplex mode of an Ethernet electrical interface working in either auto-negotiation or non-auto-negotiation mode.

• Configuring the duplex mode for an interface in auto-negotiation mode:

1. Run system-view. The System View is displayed.

2. Run interface interface-type interface-number. The Ethernet interface view is displayed.

3. Run negotiation auto. The Ethernet interface is configured to work in auto-negotiation mode.

4. Run auto duplex { full | half }*. The duplex mode is set for the Ethernet interface. 

By default, an Ethernet interface negotiates the duplex mode with the remote interface.

• Configuring the duplex mode for an interface in non-auto-negotiation mode:

1. Run system-view. The System View is displayed.

2. Run interface interface-type interface-number. The Ethernet interface view is displayed.

3.Run undo negotiation auto. The Ethernet interface is configured to work in non-auto-negotiation mode.

4. Run duplex { full | half }. The duplex mode is set for the Ethernet interface.

By default, the duplex mode of an Ethernet interface is full-duplex.
View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."

My Followers

Login and enjoy all the member benefits

Login

Huawei Enterprise Support Community
Huawei Enterprise Support Community
Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.