When we configure the disk array for VCM,we need to change the IP address of it.The following is the method:
Enter https://Management port IP address:8088 in the address box of a browser, and pressEnter.
Enter the user name and password, and clickLog In. The disk array management page is displayed.
On the right navigation bar, click "System" .
Click "rotate" button to switch to the rear view.
Click the management port of the controller. TheManagement Portdialog box is displayed, as show in Figure
Click Modify to set the IP address, subnet mask, and gateway IP address. Then clickApply..TheDangerdialog box is displayed.
Confirm the information in the dialog box and selectI have read and understood the consequences associated with performing this operation. ClickOK.The IP address is changed
Use the same method to change the IP address of the management port on the other controller.
