This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Enterprise
Community Forums Switches
How to change stack port ...

How to change stack port from 10ge to 40ge?

Created: May 30, 2019 20:00:26Latest reply: May 30, 2019 20:05:23 47 1 0 0
  Rewarded Hi-coins： 0 (problem resolved)
display all floors #1

How to change stack port from 10ge to 40ge?

  • x
  • convention：

I have this problem too (0) Favorite(0) Share Report
Featured Answers
Official Created May 30, 2019 20:05:23 Helpful(0) Helpful(0)

Hey!

The following solutions apply only to the stack of CE8800, CE7800, CE6800, and CE5800 series switches instead of the stack of CE12800, CE16800, and CE12800E series switches.

Perform the following operations to meet this requirement:

1. Create a new logical stack port and add 40GE ports in the created logical stack port. Connect the 40GE ports using cables to set up a stack in a ring topology.

2. Remove the cables of the 10GE ports and delete the stack configuration of these ports.

If the stack has been set up in a ring topology, remove the 10GE ports from the logical stack port, remove their cables, add the 40GE ports in the logical stack port and then connect the 40GE ports using cables.




  • x
  • convention：
All Answers
DCN_Documentation Official Created May 30, 2019 20:05:23 Helpful(0) Helpful(0)

Hey!

The following solutions apply only to the stack of CE8800, CE7800, CE6800, and CE5800 series switches instead of the stack of CE12800, CE16800, and CE12800E series switches.

Perform the following operations to meet this requirement:

1. Create a new logical stack port and add 40GE ports in the created logical stack port. Connect the 40GE ports using cables to set up a stack in a ring topology.

2. Remove the cables of the 10GE ports and delete the stack configuration of these ports.

If the stack has been set up in a ring topology, remove the 10GE ports from the logical stack port, remove their cables, add the 40GE ports in the logical stack port and then connect the 40GE ports using cables.




  • x
  • convention：
Back to list

Reply

Reply
Advanced
B Color Image Link Quote Code Smilies
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

Login and enjoy all the member benefits

Login
Huawei Website Support About Huawei Privacy Terms of Use
Huawei Enterprise Huawei Carrier Forum Training & Certification

Copyright © 2019 Huawei Technologies Co., Ltd. All rights reserved.

Fast reply Scroll to top