Hi Everyone,
nowadays a lot of people use wireless and it becomes an important tool for every person.
it's hard to live without wifi.
now I have noticed a lot of users connecting to my wifi router and noticed it becoming so slow.
first thing how are they getting my passwords?
it is easy, whenever I gave my wireless password to one of my friend, later onwards he can share it with others, and then it's a chain reaction. it will go to everyone forever.
even you change the password and when you gave it to your friend same thing will happen.
so here is how to block users permanently from your own wireless router.
here I took some examples of the most commonly used home routers.
How to Blacklist WiFi User?
Blocking some is not that much difficult. all you need to do is to follow these steps one by one.
cheers to Fast internet from now onwards.
Multiple devices can connect to a WiFi network wirelessly without a password for public WiFi networks and with a password for password-protected WiFi. The more is the number of WiFi users the weaker the network quality for each of them gets and the speed degrades. Data consumption increases for host and the connected WiFi users individually face choppy internet service as well as poor connection. The host still has control over the internet connection and WiFi users that are connected to the router.
Here is how you can blocklist WiFi users on your network. To do so you can use the access control feature and block the WiFi user on your network. You need to turn on Access Control for this and here is how you do that.
For TP-Link
Open your browser and go to 192.168.0.1 or 192.168.1.1.
Log in with your default username and password.
Now go to Advance > Security > Access Control.
Under Online Devices you have a list of who is accessing your WiFi.
Click on the Block Icon and click save.
For D-Link
Open your default gateway IP on your browser – 192.168.0.1 or 192.168.1.1.
Login using the default admin details (admin/admin)
Go to Wireless > Advanced Wireless > click ACL Setup.
Now click on “Enable Wireless Access Control Mode” and select MAC Addresses you want to give permission to.
Save changes by clicking Apply.
Small Note:
Under “Active Client Table” you can see your device’s IP in order to prevent getting it blocked.
For NetGear
Use any of the preferred browsers from your device while you are connected to the router.
Now go to https://www.routerlogin.net or https://www.routerlogin.com.
Now enter the username and password to log in with your router. The username and password by default are admin and password that you can try if they are not manually changed in the past.
Go to Advanced > Advanced Setup > Wireless Settings.
Now click on the “Set Up Access List” button.
On the next page click “Add” and select the Device Name from Available Wireless Cards and click Apply.
Now Turn Access Control On and Apply Changes.
Now your WiFi can only be accessed by the IP Addresses you've selected and restricted login from any other devices/IP.
Cheers to fast internet and thanks for reading.
@little_fish @Vlada85 @Nino_Chou @Kevin_Thomas @Chenxintao @E.DR_91 @Unicef @Vijji @Somemeow @MahMush @Lan59 @bek7 @Sara_Obaid @IndianKid @dragos_v
