Got it

How to adjust the DCN NET to maintain the hop number of routes equal or below 20?

Latest reply: Oct 1, 2021 05:05:19 208 7 0 0 0

Issue affecting:

Checking the Hop Number of routes


Issue analysis:

The max hop number of route is more than 20, may cause data delay


Rectification suggestion

Please adjust the DCN net.


Hello,
It seems that you are not requesting help.
View more
  • x
  • convention:

Posted by chenhui at 2021-09-28 03:00 Hello,It seems that you are not requesting help.
Hi Sir, i just want to know How to adjust the DCN NET to maintain the hop number of routes equal or below 20?
View more
  • x
  • convention:

Posted by matahimik at 2021-09-28 06:57 Hi Sir, i just want to know How to adjust the DCN NET to maintain the hop number of routes equal o ...

Dear friend!
You cannot perform this operation on the U2000 or NCE. You can perform this operation only on the Navigator.
Run the commands to set the route distance:cm-set-maxdist
For example:
:cm-set-maxdist:20      # The maximum route distance cannot be set to 0.

Thanks!

View more
  • x
  • convention:

user_4397771
user_4397771 Created Sep 29, 2021 12:50:33 (0) (0)
 
Posted by liqiang185 at 2021-09-29 03:41 Dear friend!You cannot perform this operation on the U2000 or NCE. You can perform this operation ...
Thank You Sir. Is there impact for this command sir?
View more
  • x
  • convention:

Posted by matahimik at 2021-09-29 03:44 Thank You Sir. Is there impact for this command sir?
After the maximum number of hops is configured, you need to perform a warm reset on the board. After the board works normally, if the ECC distance between an NE and the board is greater than 20 hops, the ECC communication is automatically interrupted. In this way, ECC storms can be avoided.
View more
  • x
  • convention:

Posted by matahimik at 2021-09-29 03:44 Thank You Sir. Is there impact for this command sir?

Hi there!

After the maximum number of hops is configured, you need to perform a warm reset on the board. After the board works normally, if the ECC distance between an NE and the board is greater than 20 hops, the ECC communication is automatically interrupted. In this way, ECC storms can be avoided.

More information:

https://forum.huawei.com/enterprise/en/ecc-storm-troubleshooting-and-preventive-measures/thread/759917-875


View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.