Dear Will
To add the U1960 gateway on the BMU management page of the UC2.2 network, perform the following steps:
1. Configure the BMU IP address authentication on the U1900 series unified gateway.
a. Log in to the U1900 series unified gateway through the CLI and enter the Config mode.
b. Run config add trust server ip address 192.168.10.1/24 to configure IP address authentication.
c. Run the save command to save the data.
2. Log in to the BMU management system as the admin user. Choose Function Maintenance > Unified Gateway Maintenance. Click Add to add a unified gateway.
Best wishes!