How to add ONT with WAN protocol type ipv4/ipv6

Hi, friend!

I'm sorry! I'm just dealing with another friend's problem.

The protocol type cannot be modified. You need to delete the original WAN and then add another WAN.

You can apply a VAS profile on the U2000 to configure the dual stack for an ONT.

Thanks!

Can i create a VAS profile with on cli?
I would like to add the onu with ipv6 enable using command line.

Thanks for replay

Hi, friend!

You need to collect device information to check whether the device supports dual-stack configuration in the VAS profile. 

Can you provide more detailed information about the equipment?

Thanks!

Thanks again for replay.

The ont is in my default way of configuration.  I did not find any commands to change the wan protocol on olt command line and when i get insite ont by telnet too. 

Log and configuration is here

Thanks

I searched all commands in diagnose at olt and I couldn't find how to enable wan protocol ipv4 and ipv6 at pppoe. I have checked too in telnet at ont. No success.

If i can find a line command to make a new wan configuration at ont it will help me to add a new and delete the old one.

Would be better to add ont already with ipv4/ipv6.

Thanks

I am sorry!

I've seen this information, and I need some time to analyze it. 

Thank you very much!

Hi, friend!

I've read your feedback.

Depending on your management channel. ( ACS /U2000 /WebUI )

In the configuration file, I didn't find Tr069 Wan., Therefore, it is impossible to configure dual-stack through the ACS.

If you have a U2000 and bind a VAS profile to the U2000, you can modify the VAS profile based on your profile.

If manual configuration is performed on the web page, submit the RM to the local representative office for approval by the product line.

Thanks!

HI

I read about in a post telling about the new upgrade for MA5800 that we can authorize the ONT with WAN profile with pppoe in Ipv4 and ipv6. It is true?

Thanks

hii