How to add a participant to the SMC without knowing their IP address?
Created: Jul 29, 2019 10:55:42Latest reply: Jul 29, 2019 11:10:45
367
1
8
0
0
Rewarded HiCoins：
0
(problem resolved)
- x
- convention：
- Emotion(0)
Featured Answers
|
Good day! Configuring the participant endpoint To configure the participant endpoint, perform the following steps: 1. Log in to the participant endpoint web interface. 2. Choose System Settings > Network > SNMP Settings. The SNMP Settings page is displayed, as shown below:  3. Select Enable for Enable SNMP and V3 trap for Trap version. Set any of the following to the SMC IP address: Trap server address 1, Trap server address 2 or Trap server address 3. 4. Retain the default settings for the SNMPv3 authentication parameters. Configuring the SMC To configure the SMC to add an auto-detected participant, perform the following steps: 1. Log in to the SMC web interface. 2. Choose Devices > Auto Detect. The Auto Detect page is displayed. 3. Click the arrow of the Model column, select the participant endpoint models, and click Query, as shown in the figure below. The SMC displays a list of participants that match the selected endpoint models:  4. Select a participant and click Add to System. 5. Select an organization to which you want to add the participant and click OK. The SMC connects to the participant endpoint and displays the participant configuration information |
|
All Answers
|
Good day! Configuring the participant endpoint To configure the participant endpoint, perform the following steps: 1. Log in to the participant endpoint web interface. 2. Choose System Settings > Network > SNMP Settings. The SNMP Settings page is displayed, as shown below: 3. Select Enable for Enable SNMP and V3 trap for Trap version. Set any of the following to the SMC IP address: Trap server address 1, Trap server address 2 or Trap server address 3. 4. Retain the default settings for the SNMPv3 authentication parameters. Configuring the SMC To configure the SMC to add an auto-detected participant, perform the following steps: 1. Log in to the SMC web interface. 2. Choose Devices > Auto Detect. The Auto Detect page is displayed. 3. Click the arrow of the Model column, select the participant endpoint models, and click Query, as shown in the figure below. The SMC displays a list of participants that match the selected endpoint models: 4. Select a participant and click Add to System. 5. Select an organization to which you want to add the participant and click OK. The SMC connects to the participant endpoint and displays the participant configuration information |
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
