For Ethernet or FC switches, does the wavelength division device act like an Ethernet adapter, which is equivalent to extending the Ethernet link? Do I need to set some VLANs on the WDM equipment? Also, two data centers are equipped with a WDM device and a core switch respectively. The WDM devices are in a pair. Do the ports that connect to the switch must be connected to the same port?
To configure an FC service, you only need to select the FC rate level and the port mode of the tributary board. Other operations are almost the same as those for configuring an SDH service. Example:
To configure an FC service, you only need to select the FC rate level and the port mode of the tributary board. Other operations are almost the same as those for configuring an SDH service. Example:
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
Politically sensitive content
Content concerning pornography, gambling, and drug abuse
Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."