How many ports are available on eNSP for CE6800?

yangyong · Created Oct 24, 2018 03:08:23

Hey there!

Only G1/0/0 to G1/0/9 can be used as CE switches on eNSP, including CE6800 and CE12800. It is a software limit.

And CE6800 doesn't support a stack of CE12800's. How many ports are available on eNSP for CE6800?-2784215-1

Sergio93 · Created Oct 22, 2018 22:25:55

Hi,

Try to check if you can add some cards to this chassis as for AR:

How many ports are available on eNSP for CE6800?-2783135-1

This article contains more resources

You need to log in to download or view. No account? Register

x

Fernandoizsa · Created Oct 22, 2018 22:47:12

This post was last edited by Fernandoizsa at 2018-10-23 01:29. Hi, i suggest download the newest ESNP version, for the CE some boards not available compared with the AR for example. In the ESNP the CE only has available 10 Interfaces.Can you confirm the ENSP version ?

juanpernia · Created Oct 23, 2018 12:51:40

Hi, I have a version of eNSP 1.2.00.150 V100R002C00, was check for updates and not updates available. I will try to add another card to this device but not any available for this device like a AR. Thanks for your comments.

juanpernia · Created Oct 23, 2018 13:42:39

Posted by Fernandoizsa at 2018-10-22 22:47 Hi, i suggest download the newest ESNP version, for the CE some boards not available compared with t ...

I have the last one version. I will try a stack configuration and CE 6800 and CE 12800 don't support stack configuration on eNSP, right?.

Mysterious.color · Created Oct 23, 2018 14:05:07

yeah that's what i think too

yangyong · Created Oct 24, 2018 03:08:23

Hey there!

Only G1/0/0 to G1/0/9 can be used as CE switches on eNSP, including CE6800 and CE12800. It is a software limit.

And CE6800 doesn't support a stack of CE12800's. How many ports are available on eNSP for CE6800?-2784215-1

juanpernia · Created Oct 24, 2018 13:14:37

Posted by yangyong at 2018-10-24 03:08 CE switch on the eNSP only G1/0/0 to G1/0/9 can be used, including CE6800 and CE12800. It is softwa ...

The stack configuration is between two CE of the same type, for example two CE6800. But on the cli on the eNSP don't appear the stack command. Maybe this is no available on eNSP.

wissal · Created Aug 14, 2019 20:37:21

Hi,

Complementing the information on the number of ports that can be used of the CE6800 switch in the eNSP simulator I comment:

1. The switch effectively shows available 48 and a maintenance port as shown

in the following figures:

CE6800 cuántos puertos están disponibles en eNSP para este dispositivo-3033947-1

CE6800 cuántos puertos están disponibles en eNSP para este dispositivo-3033947-2

2. However, only 20 ports can be used within the range of GE1 / 0/0 to GE1 / 0/19 and the port of

MEth0 / 0/0 maintenance.

3. It is mentioned that this is a limitation in the eNSP simulator without thier I consider that with 20 available ports it is more than enough to carry out any topology, if we consider that this type of switches are used in the aggregation layer or core these would only use some ports for corresponding data output.

The following image shows all available ports connected to different hosts.

Thanks

How many ports are available on eNSP for CE6800?

Recommended answer

This article contains more resources

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

How many ports are available on eNSP for CE6800?

Recommended answer

This article contains more resources

Third Party’s Trade Secret

My Followers