seid | Indicates the start device ID. The device ID is equivalent to the registration account of a SIP device, such as the SIP user ID configured during IP phone registration. | The value must be a string consisting of 1 to 31 characters. This parameter has no default value. |
authorizationtype | Indicates the authentication mode, which is used by the system to authenticate a SIP device when the SIP device attempts to register with the system. The following options are available: authbyeid (authentication based on the password), noauth (no authentication), authbyip (authentication based on the IP address), authbyeidandip (authentication based on the password and IP address), and authbyaddrpool (authentication based on the IP address pool). To increase the security of user accounts, you are advised to set this parameter to authbyeid, authbyip, authbyeidandip, or authbyaddrpool. | Five options are available: authbyeid, noauth, authbyip, authbyeidandip, and authbyaddrpool. This parameter has no default value. |
pooltype | Indicates the IP address pool type. Set this parameter when authorizationtype is set to authbyaddrpool. | Two options are available: single and all. This parameter has no default value. |
poolindex | Indicates the index of an IP address pool. This parameter is optional when pooltype is set to all, and mandatory when pooltype is set to single. | The value must be an integer ranging from 0 to 999. This parameter has no default value. The value must be an integer ranging from 0 to 99 for the U1960. |
isuc | Indicates whether a SIP device is an eSpace soft terminal. eSpace soft terminals are client software that supports multiple communication modes. eSpace soft terminals include: - eSpace Desktop and eSpace Console running on PCs
- eSpace Mobile running on mobile phones
- eSpace Mobile HD running on tablets
| Two options are available: yes and no. The default value is no. |
ip | Indicates the IP address. This parameter needs to be set only when authorizationtype is set to authbyeid or authbyeidandip. The IP address must be the same as that specified for the SIP device. | The value format varies depending on the device model. U1960/U1911/U1981: IPv4: a.b.c.d IPv6: a string consisting of 1 to 46 characters U1910/U1930/U1980: a.b.c.d |
password | Indicates the authentication password. This parameter needs to be set only when authorizationtype is set to authbyip or authbyeidandip. The password must be the same as that specified for the SIP device. | The value must be a string consisting of 8 to 31 characters. This parameter has no default value. |
pktmin | Indicates the minimum packetization time, in milliseconds. The packetization time indicates how many milliseconds of data an RTP packet contains. | Four options are available: Ten, Fifteen, Twenty, and Thirty. The default value is Twenty. |
pktmax | Indicates the maximum packetization time, in milliseconds. | Four options are available: Ten, Fifteen, Twenty, and Thirty. The default value is Twenty. |
supportupdate | Indicates whether a SIP device supports upgrade. | Two options are available: yes and no. The default value is yes. |
localgwid | Indicates the local gateway ID configured in the distributed network. | The value must be an integer, and the value range varies depending on the device model. U1911: 0-19 U1960: 0-199 U1980: 0-299 U1981: 0-1023 This parameter has no default value. |
joint | Indicates whether to enable the linkage service for a SIP device. | Two options are available: yes and no. The default value is no.Modify the SIP user device from no to yes, if SIP device need registration authentication, then reconfigure the device and linkage of SIP SIP device password authentication mode and password. |
isrespc | Whether to reserve sipue with pc tail in unjoint. | Three options are available: yes, no and bysoftargu. The default value is bysoftargu. |
issyn | Indicates whether to synchronize data between the central node and local node. | Two options are available: yes and no. The default value is no. |
supportsrvsynch | Indicates whether a SIP device supports service synchronization. | Two options are available: yes and no. The default value is yes. |
supportalertinfo | Indicates whether a SIP device supports Alert-Info. If a SIP device doesn't support Alert-Info,you cann't use distinctive ring tone service on the device. | Two options are available: yes and no. The default value is no. |
inviteauth | Indicates whether to authenticate a SIP device when the SIP device attempts to make a call or not. | Two options are available: yes and no. The default value is yes. |
