How find the overflow alarms saving place on U2000 server

faysalji · Created Oct 18, 2018 09:01:31

Thank you !!!!

Torrent · Created Oct 18, 2018 09:10:25

When an NE is faulty, you can collect the NE data for fault identification and analysis. There are fast fault collection and full fault collection

The product feature you have purchased may use personal information of users when providing services or maintenance. Therefore, you are obligated to take considerable measures, in compliance with the laws of the countries concerned and the user privacy policies of your company, to ensure that the personal data of users is fully protected.

thanks for sharing us such a good example, thanks.

This post was last edited by Torrent at 2018-10-31 07:12.

Finn92 · Created Oct 18, 2018 09:10:40

The output level of each channel can be reduced based on the maximum output level. The CMC output is flat. The output level of each channel can be configured. Configure the output level for channels one by one. The maximum downstream output level can be set by running the cable downstreamchannel-id rf-power value command.

we should notcie it ,brother .

This post was last edited by Finn92 at 2018-10-31 08:37.

SupperRobin · Created Oct 18, 2018 09:11:34

Thanks for you share about this which is very useful for my daily work.
And now i can easy to check the U2000 ISSUE if i face any issue about this.before this i aways do not know how to deal with them,and wasted a lot of time to serch this.Thanks agin for you selfless Sharing, Hope you can aways work like this.:):):)

Skay · Created Oct 18, 2018 09:11:37

Thanks for your sharing , use below suggest , i solved one case .

1.Choose Administration > Task Schedule > Task Management from the main menu (traditional style); alternatively, double-click System Management in Application Center and choose Task Schedule > Task Management from the main menu (application style).
2.In the Task Management window, choose Overflow Dump from the navigation tree on the left.
3.In the task list of the Task Management window, right-click Alarm Overflow Dump and choose Attributes from the shortcut menu.
4.In the Attributes dialog box, click the Extended Parameters tab.
5.then we can see the file path for alarms overflow saving place

littlestone · Created Oct 18, 2018 10:59:15

its so great

I was already disappointed with this community. I feel that this community has no future, and my heart is full of sorrow. But after reading this post, I made hope for the community. It is you who let my heart rekindle the fire of hope. It is you who have revived my heart. You saved me a cool and cool heart!
Originally, I decided not to return any posts in the community, but after reading your post, I told myself that this post must be returned! This is a rare sticker that has been rare for a hundred years! Heaven has eyes, let me see such a wonderful post in the eugenic year.

SupperRobin · Created Oct 19, 2018 09:25:30

The stream-reassemble overflow-mode command configures the action for cache overflow during TCP stream reassembly.
The undo stream-reassemble overflow-mode command restores the default action for cache overflow during TCP stream reassembly.
The default action for cache overflow during TCP stream reassembly is discard. This post was last edited by SupperRobin at 2018-10-31 06:47.

No.9527 · Created Oct 19, 2018 09:28:39

Ensure that switches are unconfigured and have no input on the console port. After these switches are connected to the network, they automatically change to the cloud-based management mode and obtain the cloud management platform's address information using DHCP. Switches need to restart during mode switching and need to wait for 5 minutes before restarting if they change to the cloud-based management mode using DHCP. This post was last edited by No.9527 at 2018-10-31 06:34.

littlestone · Created Oct 23, 2018 07:32:49

If a large number of TC and TCN BPDUs are received, run the stp tc-protection command in the system view to suppress TC/TCN BPDUs. After this command is used, the device processes TC BPDUs once every 2s only. To change the number of TC/TCN BPDUs to be received, use either of the following two methods: Set the maximum number of TC/TCN BPDUs that can be processed in a specified period using the stp tc-protection threshold threshold command; change the Hello timer length using the stp timer hello hello-time command This post was last edited by littlestone at 2018-10-31 06:10.

How find the overflow alarms saving place on U2000 server

This article contains more resources

Third Party’s Trade Secret

My Followers

Hot Topics

Enterprise

Consumer

Corporate

Carriers

How find the overflow alarms saving place on U2000 server

This article contains more resources

Third Party’s Trade Secret

My Followers

Hot Topics