Hello, everyone. I want to share a EC product case. How Does the U1900 Series Unified GatewaysReport) on eSpace UC

Background

Scenario : This type of problem often occurs during maintenance. I want to share a EC product case. How Does the U1900 Series Unified GatewaysReport) on eSpace UC.

Version: eSpace UC V200R003

Method introduction & Solution

1.       Step 1

Add the eSight IP address. config add snmp manager ip

Step 2

Create an SNMP user group. config add snmp group name securitymode

Step 3

  Create an SNMP user.

Step 4

Use the same user name and password on eSight to connect to the U1900 series unified gateways

2.       The U1900 series unified gateways reports alarms to eSight using any of the following protocols: SSH ,Telnet ,SNMP V3

3.       The value of authpassword and privacypassword must be a string of 8 to 15 characters that contain at least two types of the following: uppercase letters, lowercase letters, digits, and special characters. In addition, the password must not be a string of repeated sub-strings, for example, ABABABAB, ABCABCABC, and ABCDABCD.

Conclusion

The above scenarios are completed in the laboratory environment, only for case reference, not as the guidance basis for specific problems. If there are further questions. Please obtain the above log and send it to R&D or contact us with TAC support team.

Postscript

If you have any questions, welcome to reply and exchange, looking forward to your reply and good comments. thank you.