How does the RSE6500 achieve single-point recording?

RaduCCN · Created May 13, 2019 13:22:28

Hello!

Can you record point to point?

Yes you can. The configuration scenarios are available on the website documentation via this link.

How does the RSE6500 achieve single-point recording?

Everything is explained in the documenation under the Scenario 1: Single-Point Recording, including a Scenario, a Data Plan, a Configuration Procedure and a Verification procedure.

Please let us know if this information helps towards your question.

xiaker2012 · Created May 10, 2019 01:05:26

Hi there!

The RSE6500 and the terminal are managed by the SMC2.0. The single-point recording can be started by calling the unified recording number of the SMC2.0 or the number of the RSE6500.

Point-to-point recording is not possible, because the point-to-point conference is actually a three-point conference in the recording and recording server, which requires an MCU.

Methods as below:

1. Log in to "http://support.huawei.com/enterprise"Huawei Enterprise Technical Support Website.

2. Search for “RSE6500” and enter the RSE6500 product documentation page.

3. For the product version of the corresponding version, refer to the chapter "Configuration > Configuration Guide > Typical Network Configuration > SMC2.0 Networking > Single-point Recording Networking" to configure the RSE6500 single-point recording.

xiaker2012 · Created May 10, 2019 01:05:26

Hi there!

The RSE6500 and the terminal are managed by the SMC2.0. The single-point recording can be started by calling the unified recording number of the SMC2.0 or the number of the RSE6500.

Point-to-point recording is not possible, because the point-to-point conference is actually a three-point conference in the recording and recording server, which requires an MCU.

Methods as below:

1. Log in to "http://support.huawei.com/enterprise"Huawei Enterprise Technical Support Website.

2. Search for “RSE6500” and enter the RSE6500 product documentation page.

3. For the product version of the corresponding version, refer to the chapter "Configuration > Configuration Guide > Typical Network Configuration > SMC2.0 Networking > Single-point Recording Networking" to configure the RSE6500 single-point recording.

RaduCCN · Created May 13, 2019 13:22:28

Hello!

Can you record point to point?

Yes you can. The configuration scenarios are available on the website documentation via this link.

How does the RSE6500 achieve single-point recording?

Everything is explained in the documenation under the Scenario 1: Single-Point Recording, including a Scenario, a Data Plan, a Configuration Procedure and a Verification procedure.

Please let us know if this information helps towards your question.

How does the RSE6500 achieve single-point recording?

Best answer

Recommended answer

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

How does the RSE6500 achieve single-point recording?

Best answer

Recommended answer

Third Party’s Trade Secret

My Followers