How do I replace CPU?

olive.zhao · Created Nov 28, 2020 08:18:36

You can refer to the following steps:

1. If HA has been configured and the current node is the backup server, perform an HA switchover as follows:

a. Log in to the backup server by referring to Log In to the eBackup Server.

b. Run the su root command and enter the password of user root to switch to user root.

The default password of user root is Cloud12#$.

c. Run the following command to restart the eBackup service process. The active and standby nodes will be switched over.

service hcp restart

2. Replace the CPU.

For details, see Removing a Processor and Installing a Processor in the FusionServer Pro 2288H V5 Server V100R005 Maintenance and Service Guide.

Hope can help you!

olive.zhao · Created Nov 28, 2020 08:13:13

Hello, dear!

Have a nice day!

Which node has a fault CPU?

Wait for your feedback!

olive.zhao · Created Nov 28, 2020 08:18:36

You can refer to the following steps:

1. If HA has been configured and the current node is the backup server, perform an HA switchover as follows:

a. Log in to the backup server by referring to Log In to the eBackup Server.

b. Run the su root command and enter the password of user root to switch to user root.

The default password of user root is Cloud12#$.

c. Run the following command to restart the eBackup service process. The active and standby nodes will be switched over.

service hcp restart

2. Replace the CPU.

For details, see Removing a Processor and Installing a Processor in the FusionServer Pro 2288H V5 Server V100R005 Maintenance and Service Guide.

Hope can help you!

Unicef · Created Nov 28, 2020 08:20:05