How Do I Rectify the Failure to View SA Information by Running the display ipsec sa Command After IPSec Is Configured?

Latest reply: Jan 14, 2017 16:08:54 999 2 0 0

To rectify the failure, perform the following operations:

  1. Perform the ping operation to check the public network connectivity.

  2. If the IPSec tunnel is established through IKE negotiation, run the display ike sa command to check whether the IKE SA is successfully established.

  3. Wait about 10 seconds and run the display ipsec sa command again.

  4. Run the display interface brief command to verify that the interface bound to the IPSec policy is in the Up state.

  5. Verify that IPSec is configured correctly.


  • x
  • convention:

user_2790689
Created Jan 14, 2017 16:07:26 Helpful(0) Helpful(0)

ding
  • x
  • convention:

user_2790689
Created Jan 14, 2017 16:08:54 Helpful(0) Helpful(0)

ding
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login