How do I monitor CRC error and Up/Down events of switch iInterfaces?
Created: Jul 29, 2019 06:07:16Latest reply: Jul 29, 2019 06:15:46
397
5
0
0
Rewarded Hi-coins：
0
(problem resolved)- x
- convention：
Featured Answers
|
If you want to monitor the CRC error and interface up/down events, you can use NMS to monitor it. However, if you want to check the CRC error on the switch, you can use the command “display counters error” and it will show which interface has the CRC error:  Also, if the CRC error increases or the interface up/down event occurs, the switch will generate traps like below. You can check the traps using the command “display trapbuffer”.    |
|
|
Kindly find the link below to download the MIB file.
https://support.huawei.com/enterprise/en/software/22182122-ESW1000218670 |
|
All Answers
|
If you want to monitor the CRC error and interface up/down events, you can use NMS to monitor it. However, if you want to check the CRC error on the switch, you can use the command “display counters error” and it will show which interface has the CRC error: Also, if the CRC error increases or the interface up/down event occurs, the switch will generate traps like below. You can check the traps using the command “display trapbuffer”. |
|
|
|
|
|
|
|
|
|
|
|
Kindly find the link below to download the MIB file.
https://support.huawei.com/enterprise/en/software/22182122-ESW1000218670 |
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
