How do I modify the camera network parameters in batches.
Created: Sep 19, 2019 09:01:17Latest reply: Sep 19, 2019 09:07:49
459
2
0
0
0
Rewarded HiCoins：
0
(problem resolved)
- x
- convention：
- Emotion(0)
Featured Answers
|
Hello Alexandru
You can download the IPC tool and configure the cameras in batches. Please refer to this LINK https://support.huawei.com/enter ... c-tool-pid-21500933 10.1 Setting Basic NetworkParameters
You can set basic network parameters,including the maximum transmission unit (MTU) size and quality of service (QoS)of media/signaling streams, for cameras. l The MTU is the largest packet of data that can be transmitted on anetwork. l The QoS measures the quality of the transmission system and theeffectiveness of the services, as well as the capability of a service providerto meet the demands of users. Procedure Step1 From thecamera list, select one camera or multiple cameras of the same model. Step2 Choose Settings > Configuration, or click  in the shortcut toolbar.NOTE To open the Configuration dialog box, you can alsoright-click the camera list and choose SetParameter For Selected Camera (s) from the shortcut menu. The Configurationdialog box is displayed. Step3 Choose Network Configuration > Network Parameters. The NetworkParameters tab page is displayed, as shown in Figure 10-1. Figure10-1 Network Parameters tab page  Step4 Set basicnetwork parameters. 1. Select MTU value and set the MTU value. NOTE Ifthe IPv6 functions are enabled, the MTU value must fall within the range from1280 to 1500. 2. Select Media stream DSCP or Signalingstream DSCP, and set the QoS value. A larger value indicates higher QoS. The largest value is 63. Step5 Click OK. A confirm dialog box is displayed. Click OK. If Successis displayed in the Operation columnof the cameras, the basic network parameters are successfully set for thecameras. ----End |
|
All Answers
|
Hello Alexandru
You can download the IPC tool and configure the cameras in batches. Please refer to this LINK https://support.huawei.com/enter ... c-tool-pid-21500933 10.1 Setting Basic NetworkParameters
You can set basic network parameters,including the maximum transmission unit (MTU) size and quality of service (QoS)of media/signaling streams, for cameras. l The MTU is the largest packet of data that can be transmitted on anetwork. l The QoS measures the quality of the transmission system and theeffectiveness of the services, as well as the capability of a service providerto meet the demands of users. Procedure Step1 From thecamera list, select one camera or multiple cameras of the same model. Step2 Choose Settings > Configuration, or click in the shortcut toolbar.NOTE To open the Configuration dialog box, you can alsoright-click the camera list and choose SetParameter For Selected Camera (s) from the shortcut menu. The Configurationdialog box is displayed. Step3 Choose Network Configuration > Network Parameters. The NetworkParameters tab page is displayed, as shown in Figure 10-1. Figure10-1 Network Parameters tab page Step4 Set basicnetwork parameters. 1. Select MTU value and set the MTU value. NOTE Ifthe IPv6 functions are enabled, the MTU value must fall within the range from1280 to 1500. 2. Select Media stream DSCP or Signalingstream DSCP, and set the QoS value. A larger value indicates higher QoS. The largest value is 63. Step5 Click OK. A confirm dialog box is displayed. Click OK. If Successis displayed in the Operation columnof the cameras, the basic network parameters are successfully set for thecameras. ----End |
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
