How do I configure time synchronization for the U1900 series unified gateway?
Q: How do I configure time synchronization for the U1900 series unified gateway?
A: The U1900 series unified gateway can function as an NTP client to synchronize time from an NTP server. The U1900 series unified gateway can also function as a server to provide the time synchronization service.
Configuring the U1900 Series Unified Gateway as an NTP Client
Step 1 Access the web management system, and choose System > Time Configuration.
Step 2 Enable the NTP service, and enter the time zone and the NTP server information in the NTP Client Configuration tab.
Figure 1-1 Setting the NTP server
Step 3 Click Data Save in the upper right corner of the web management system.
----End
Configuring the U1900 Series Unified Gateway as an NTP Server
The unified gateway can be configured as an SNTP server.
Step 1 Access the web management system, and choose System > Device Management.
Step 2 Click Configure next to SNTP Server.
Step 3 Choose On, and click OK.
Figure 1-2 Enable SNTP Server
Step 4 Click Data Save in the upper right corner of the web management system.
----End
This post was last edited by UCC_Express at 2018-07-09 02:25.
