How Do I Configure Multicast Packet Suppression to Reduce Impact of a Large Number of Low-Rate Multicast Packets on the Wireless Network?

user_2790689 · Created May 18, 2017 06:46:43

ding

Adamcolob · Created May 23, 2017 01:03:19

No ACK mechanism is provided for multicast packet transmission on air interfaces. In
addition, wireless links are unstable. To ensure stable transmission of multicast packets, they
are usually sent at low rates. If a large number of such multicast packets are sent from the
network side, the air interfaces may be congested. You are advised to configure multicast
packet suppression to reduce impact of a large number of low-rate multicast packets on the
wireless network. Exercise caution when configuring the rate limit; otherwise, the multicast
services may be affected.
l In direct forwarding mode, you are advised to configure multicast packet suppression on
switch interfaces connected to APs.
l In tunnel forwarding mode, you are advised to configure multicast packet suppression on
WLAN-ESS interfaces of the AC in V200R005 and in traffic profiles of the AC in
V200R006 and later versions.

How Do I Configure Multicast Packet Suppression to Reduce Impact of a Large Number of Low-Rate Multicast Packets on the Wireless Network?

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

How Do I Configure Multicast Packet Suppression to Reduce Impact of a Large Number of Low-Rate Multicast Packets on the Wireless Network?

Third Party’s Trade Secret

My Followers