Q：How do I add the number of trunk circuits？
A：Use an administrator account to log in to the web management system of a U1900 series unified gateway，choose Trunk > Trunk Configuration > SIP to set Number of trunk circuits.
How do I add the number of trunk circuits？
Step 1 Log in to the web management system.
The default user name and configuration password are admin and Change_Me respectively.
Step 2 Choose Trunk > Trunk Configuration > SIP from the navigation tree.
Click Add A Peer Office in the SIP trunk configuration area.
The blue icon point:0 (the peer device) is displayed.
Click point:0 or the solid line between the local office and point:0, and set the parameters according to actual situations and the parameter description on the page, as shown in Figure 1-1.
Figure 1-1 Configuring a SIP Trunk
Number of trunk circuits Indicates the number of trunk circuits. Set this parameter based on the actual networking scheme.
The value must be an integer, and the value range varies depending on the device model.
l U1910: 1–100
l U1911: 1–100
l U1930: 1–240
l U1960: 1–240
l U1980: 1–4000
l U1981: 1–4000
The CLI is available to set number of trunk circuits. tkcnum is the parameter to set the number of trunk circuits.
config add peercomponent domainname domainname [ip ip] tkcnum tkcnum
----End
