This post is about the process of how AC devices log in to the web network management on eNSP. Please find more information on the topic below.
How to visit AC's web platform
Before logging in to the device using web, complete the following tasks:
1. The access port of the device is configured with an IP address. The IP address must be in the same network segment as the networt card to which you are bound and the address is not used.
2. The AC device needs to be configured with the admin level.
3. Your local computer has been interoperable with the AC through the CLOUD device.
4. The device is operating normally and the HTTP service is properly configured.
5. Firefox browser software is installed on your local computer.
Figure 1. Running the environment of the web management system
NOTE:
For the setting of the eNSP cloud device binding local NIC to communicate with the emulated device, please refer to the FAQ: How to Use the Cloud Device?
Steps:
1. After configuring the cloud device and AC parameters and pinging each other, open the local Firefox browser and enter https://10.134.179.1 in the address bar (10.134.179.1 is an example. The IP address of the access port actually configured in the Ethernet interface is used). Press the Enter key to display the login interface of the Web system:
Figure 2. Web login page
2. Enter the login information.
a) Choose a language. Currently supports Chinese and English.
b) Enter your username and password. The default username is admin and the default password is admin@huawei.com.
c) Click 'Login' to enter the operation page.
3. Change the login password. The first time you log in to the web network management system, the system will force a password change.
4. To exit the current login, click 'Logout' in the upper right corner of the page to return to the login page.
Figure 3. Web management page
5. After the user has logged in successfully, no operation is performed for a fixed period of time (the default timeout period is 10 minutes) and the system automatically logs out the current login. After clicking OK, return to the login page again.
More information can be found in the eNSP help section!
