How Can the BST Function Be Enabled in the S2600 V100R001 Storage System

uzumaki.naruto · Created Mar 24, 2016 13:01:53

Enable the BST function as follows:

1. Go to the man-machine language (MML) mode.

a. In command-line interface mode, enter debug and the password to go to the debug mode.

admin:/>debug
Enter Password:
Storage:~ #

b. In debug mode, enter mml to go to the MML mode.

Storage:~ # mml
UI_Thread begin to run, host ip=127.0.0.1..
MML>

2. Run bst enable 3 in MML mode to check whether the BST function is enabled.

MML>bst enable 3
Status: 2 (1-enable 2-disable)

As shown in the previous screen, if the value of Status is 2, the BST function is disabled.

NOTE:
If the value of Status is 1, the BST function is enabled.

3. Run bst enable 1 in MML mode to enable the BST function.

MML>bst enable 1
Set BST status: 1 (1-enable 2-disable)

JuanAcosta · Created Feb 20, 2020 21:31:31

Hello, dears! I recently saw that term but I could not find the standard for it.
I would appreciate if you teach me what is it!

How Can the BST Function Be Enabled in the S2600 V100R001 Storage System

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

How Can the BST Function Be Enabled in the S2600 V100R001 Storage System

Third Party’s Trade Secret

My Followers