Q: How Can I Create RAID Groups for VCN?
A: Log in to the OMU Portal of the MPU as the Admin user, Choose Local Configuration > Local Disk, follow the guide to Create RAID Group.
more
What is the RAID configuration mode?
Table1 lists the modes for configuring RAID groups.
Table1
|
RAID Configuration Mode |
Description |
|
Recommended configuration mode |
The system automatically performs the optimized disk configuration. When the number of disks is greater than 10, the data reliability is high. |
|
Economical configuration mode |
The system automatically performs the economic disk configuration. When the number of disks is greater than 10, the disk usage is high. |
What is the procedure to create RAID?
1. Log in to the OMU Portal of the MPU as the Admin user.
2. Choose Local Configuration > Local Disk, as shown in Figure 1.
Figure 1
3. On the Local Disk tab page, click Create RAID Group. The default mode of RAID is RAID 5.
4. Select the configuration mode. The recommended configuration is recommended.
5. Click Partition RAID Group. A confirm dialog box is displayed.
6. Click OK. The RAID group is created.
For details about the operations, visit the following website:
http://support.huawei.com/hedex/hdx.do?docid=EDOC1000123600&id=eIVS_cmsg_00338
This post was last edited by UCC_Express at 2018-05-29 09:10.
