How Can I Configure the TC Management Software?

Hello, lisali!

Have a nice day!

1.   The thin client management (TCM) software is applicable only to CT3200L, CT3200 terminals. The software is provided for free and can be obtained from Huawei official website.

2.   The terminal management software of the Sunniwell TC only is applicable only to the Sunniwell ZT3200 terminal. The software is provided for free and can be obtained from Sunniwell official website www.sunniwell.com.

3.   The terminal management system (TMS) software is applicable only to ST series terminals. The software is provided for free and can be obtained from Huawei official website.

The Centerm TCM software can run on the Linux operating system. You do not need to configure the Windows Server. In addition, the free version MySQL database can be used, which does not need to be quoted and does not need to be configured on eDesigner

The START TMS software can run only on the Windows 7, 64-bit Windows 10, Windows Server 2008, and Windows Server 2012 operating systems.

The terminal management software of Sunniwell can run on Linux or Windows Server operating systems. The Linux operating system is recommended.

Hope can help you!

Hello,
Please refer to the link below
https://support.huawei.com/enterprise/en/doc/EDOC1100010650/4840b26/configuring-a-tc

Prerequisites:
- The TC and TCM can communicate with each other, and a takeover is available.
- The TC version meets the requirement. If the TC version is not the required one, upgrade it to the required one.

Procedure
Configuring an IP address for the TC

1. Start the TC.
2. Click Control Center in the lower left corner.
3. Double-click Network.
The Network window is displayed.

4. Click Property.
The Network Card window is displayed.
5. Configure the IP address:
- Teacher's TC: Select use the following IP address and enter the planned TC IP address.
- Student's TC: Select obtain an IP address automatically.
6. Click Save.
The TC IP address is configured.
Configuring an IP address for the TCM
7. Click CCCM Agent in the control center.
The CCCM Agent window is displayed.

8. Enter the server and port IP addresses on the specified management server and click OK.
9. Enter the password and click OK.
The TCM IP address is configured.
Configuring a terminal name

10. Click Network in the control center.
The Network window is displayed.
11. Click the General tab.
12. On the Terminal page, click Modify.
The Terminal Name window is displayed.

13. Change the terminal name to the planned one and click OK
14. Click OK.
The configuration is complete.

Managing TC groups

15. Log in to the TCM platform.
16. On the Client Group tab page, the TC with the configured terminal name is automatically obtained and automatically grouped based on the terminal name.

https://support.huawei.com/enterprise/en/doc/EDOC1100010650/4840b26/configuring-a-tc