How Can I Change the Device Name?

Prerequisites
The T/H sensor, UPS2000G, UPS5000E, NetCol5000A, NetCol8000A, PDU8000, and ATS have been added to the ECC500.
You have obtained the ECC500 IP address as well as the user name and password for WebUI login.
You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch.

Context
After the name of the device is changed, an alarm reported by the device will contain the new device name. Using the device name, maintenance engineers can easily locate the fault.
The names of the following devices can be changed: T/H sensor, UPS2000G, UPS5000E, NetCol5000A, NetCol8000A, PDU8000, and ATS.
The device names can be changed in the same way. The following describes how to change the names of the UPS2000G and T/H sensor.

Procedure
Step 1 Log in to the ECC500 WebUI.
Step 2 Change the UPS2000G name.

Step 3 Change the T/H sensor name.