Question
How can a decoder register with the C/S client and display video on the video wall?
Answer
1.Open a web browser, enter the IP address of the decoder in the address box, and press Enter.
2.Enter the decoder's user name and password.
3.Choose Settings > Network Configuration > Network Parameters.
On the Network Parameters page that is displayed, set basic network parameters.
4.Choose Settings > Devices Configuration > Port Configuration.
On the Port Configuration page that is displayed, set port parameters.
5.Choose Settings > Network Configuration > Client Parameters.
On the Client Parameters page that is displayed, set client parameters.
6.Log in to the C/S client as the super (old version) or Admin (new version) user. Double-click Video Wall.
The Video Wall page is displayed. If the newly added decoder is displayed on the Decoder List tab page, the decoder is successfully connected to the eSpace IVS C/S client.
7.Configure the video wall layout.
Click pencil at the lower left corner of Video Wall List.
Set the number of video panes and click Create Layout.
Drag the decoder to a video pane.
Click Save.
The video wall layout is configured.
8.Push video to the video wall.
Click window on the Live Feed tab page.
Select a camera.
9.View the live video on the video wall.
