HG8546M login problem

Hi, friend.

First, it is certain that the GPON ONT cannot be directly converted to the EPON ONT. The difference between EPON and GPON is that EPON and GPON use different technologies. The optical modem cannot be directly replaced due to different technologies.
If you need to convert GPON to EPON, you can only replace the ONT.

You need to check whether the access terminal is in the same network segment with HG8546M. You can try to Ping the IP of the device (the IP address shown on the device nameplate). If the Ping does not work, it means that the IP of the terminal is not in the same network segment with HG8546M, so the access fails.

HG series products:IP address: 192.168.1.1 or 192.168.100.1
Subnet mask: 255.255.255.0

Set the IP address to be in the same network segment as the LAN IP address of the ONT.

For example:
IP address: 192.168.1.100
Subnet mask: 255.255.255.0

For more information, please click: 

192.168.100.1

In addition, the HG8546M is a carrier product. If the problem persists, contact your local ISP.

Thanks.

Hi friend!

You can try using the recommended answers linked below (note that you need to change the IP address in the answer to the one you used):

192.168.0.1 login failure.

In addition, the third-party conversion software that you're using may cause device faults. If you need to convert to GPON/EPON, you are advised to replace the device.

If the problem persists, your device may be customized by your ISP. Contact your ISP.

Thanks!