Hi there, everybody!
This post will introduce the default account and passwords for HG8245Q2. Please have a look below for details.
BACKGROUND
HG8245Q2 has several default account and passwords, which are used for login in different scenarios. Please refer to the following figure.
P.S.
The telecomadmin user, having the highest priority in the system, cannot use the default password. Specifically, the telecomadmin user must change the password after logging in to the system.
The system displays a login failure message if the account and password for logging in to the ONT by Telnet, SSH, or web page are incorrect.
For account management using the web page, the system will be locked if you input incorrect user name and password three times within five minutes. One minute later, it will be unlocked.
For account management using the CLI, the system will be locked if you input incorrect user name and password five times within five minutes. Five minutes later, it will be unlocked.
Change the initial password after logging in to the ONT. The initial account cannot be changed.
Certain carriers may customize accounts and passwords, which are different from the default accounts and passwords listed in the preceding table. For details, contact the corresponding carrier.
Currently, the root(cli) account password is the same as the account password of a common user logging in to the ONT by web page. Before using the root(cli) account to manage an ONT, perform security planning.
This would be all on HG8245Q2 passwords. Thanks for reading this post!
