Help to connect 2 AP8050DN ala mesh without an AC needed

This need AC, then set WDS or MESH

WDS example:
http://support.huawei.com/hedex/pages/EDOC1100008272AEH0312X/02/EDOC1100008272AEH0312X/02/resources/dc/dc_wlan_example_basic_0010_copyto.html?ft=0&fe=10&hib=11.1.14.1.10.1&id=dc_wlan_example_basic_0010&text=Example%20for%20Configuring%20Back-to-Back%20WDS&docid=EDOC1100008272

mesh example:
http://support.huawei.com/hedex/pages/EDOC1100008272AEH0312X/02/EDOC1100008272AEH0312X/02/resources/dc/dc_wlan_example_basic_0011_copyto.html?ft=0&fe=10&hib=11.1.14.2.11.1&id=dc_wlan_example_basic_0011&text=Example%20for%20Configuring%20Common%20Mesh%20Services&docid=EDOC1100008272

thank you for quick reply but why do i need the AC ???

If there dont have AC, the AP only can used as FAT AP. But, the FAT AP dont support WDS or MESH.

what happensif i have an AC and the link from it to the AP's gets disconnected does the MESH/WDS stop working ???

This post was last edited by user_3041507 at 2018-04-12 22:27. Thanx for your help  .

It works now after i got hold on a AC6005-8 and upgraded it to the same software version as the AP's

And no MESH net stops working after 2 min if the AC gets disconected.

i used your MESH net example and it worked perfectly.

remember to change the management vlan and set it on the AP fist time you start the AC

Case resolved ...
helpful links http://support.huawei.com/online ... _fail_edesk001.html

convert it to FAT & set WDS

the links didn't work