Got it

Help Santa find his reindeers! Activity

END Latest reply: Feb 8, 2022 16:50:05 8006 409 24 0 1

Help Santa find his reindeers!


Help Santa find his reindeers!


winners


Let's go!




Dasher's question 
 
1. When user A and user B are in a call, which of the functions must be enabled on the U1900 when user B needs to transfer the call to user C?    
 A: Call transfer 


Dancer's question 
 
2. What network resources are included in FusionCompute?  

 A: DVSPort groupUplink


Prancer's question 


3. What compute resources are included in FusionCompute?   

A: Compute resources include hosts, virtualization layers, virtual compute resource pools, virtual CPUs, and virtual memory.


Vixen's question
 
4. What module is responsible for sending data to the next hop or final destination and removing the data from the Channel after successfully sending the data?    

A Sink


Comet's question
 
5. How do I access the U-Boot  after restarting the MM910?  

A: Press Ctrl+B


Cupid's question


6. When configuring S1 endpoint mode, which parameters are optional?     

A: USERPLANEPEER

    
Donner's question


7. In which network element is the QOS information of the dedicated bearer signed?  

A: PCRF

 
Blitzen's question


8. Is it possible that Eth-trunk member interfaces use the different Ethernet types?  

A: No

 
Olive's question


9. While destination NAT is configured on an interface where the IPSec policy group applies, will the NAT or the IPSec encapsulation be performed first?

A: NAT


Rudolph's question


10. If VLAN 1 is configured as both the management VLAN and service VLAN, what should be configured on the switch interface which connects to the AP, so that the STAs could get the IP address from the DHCP service?

A: PVID


The post is synchronized to: Community Activities

Comet's question 5

Over Serial port
View more
  • x
  • convention:

2. What network resources are included in FusionCompute?

  • DVS

  • Port group

  • Uplink


View more
  • x
  • convention:

3. What compute resources are included in FusionCompute?
hosts
virtualization layers
virtual compute resource pools
virtual CPUs
virtual memory.
View more
  • x
  • convention:

5. How do I access the U-Boot after restarting the MM910?

Press Ctrl+B when the message "Type 'ctrl+b' to enter uboot before os load during uboot start" is displayed
View more
  • x
  • convention:

4. What module is responsible for sending data to the next hop or final destination and removing the data from the Channel after successfully sending the data?

Sink
Typical Sink types are as follows:

Sinks that send storage data to the final destination, such as: HDFS and HBase
Sinks that are consumed automatically, such as: Null Sink
IPC sink that is used for communication between Agents: Avro
View more
  • x
  • convention:

7. In which network element is the QOS information of the dedicated bearer signed?

Single Network Element
View more
  • x
  • convention:

8. Is it possible that Eth-trunk member interfaces use the different Ethernet types?

Possible
View more
  • x
  • convention:

9. While destination NAT is configured on an interface where the IPSec policy group applies, will the NAT or the IPSec encapsulation be performed first?

NAT
View more
  • x
  • convention:

10. If VLAN 1 is configured as both the management VLAN and service VLAN, what should be configured on the switch interface which connects to the AP, so that the STAs could get the IP address from the DHCP service? 


Check whether all VLANs in the VLAN pool have been created.

Run the display vlan pool name pool-name command to check VLANs in the VLAN pool.

        

[AC6605] display vlan pool name sta_pool--------------------------------------------------------------------------------
Name       : sta_pool
Total      : 6
Assignment : hashVLAN ID    : 1050 to 1055--------------------------------------------------------------------------------

Run the following command to create all VLANs in the VLAN pool. After the configuration is complete, enable the STA to connect to the WLAN again and check whether the STA can obtain an IP address.


[AC6605] vlan batch 1050 to 1055


Run the dhcp trust port command to enable the DHCP trusted port on an uplink interface of the AP. Enable the STA to connect to the WLAN again and check whether the STA can obtain an IP address.

[AC6605] wlan
[AC6605-wlan-view] ap-profile id 0
[AC6605-wlan-ap-prof-default] dhcp trust port
[AC6605-wlan-ap-prof-default] quit
[AC6605-wlan-view] ap id 0
[AC6605-wlan-ap-0] profile-id 0[
AC6605-wlan-view] quit


If the STA and DHCP server are in the same network segment, a global address pool can also be used to allocate an IP address to the STA. Run the following commands to configure global address pool 1 to allocate an IP address to the STA, and bind the global address pool to VLANIF 100.


[AC6605] dhcp enable
[AC6605] interface vlanif 100
[AC6605-Vlanif100] ip address 10.23.100.1 24
[AC6605-Vlanif100] dhcp select global
[AC6605-Vlanif100] quit[AC6605] ip pool pool1
[AC6605-ip-pool-pool1] gateway-list 10.23.100.1
[AC6605-ip-pool-pool1] network 10.23.100.0 mask 24
[AC6605-ip-pool-pool1] quit




View more
  • x
  • convention:

1) Call Forwarding
View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.