Help Santa find his reindeers! Activity

Dasher's question 
 
1. When user A and user B are in a call, which of the functions must be enabled on the U1900 when user B needs to transfer the call to user C?    
 A: Call transfer 

Dancer's question 
 
2. What network resources are included in FusionCompute?  

 A: DVS，Port group，Uplink

Prancer's question 

3. What compute resources are included in FusionCompute?   

A: Compute resources include hosts, virtualization layers, virtual compute resource pools, virtual CPUs, and virtual memory.

Vixen's question
 
4. What module is responsible for sending data to the next hop or final destination and removing the data from the Channel after successfully sending the data?    

A： Sink

Comet's question
 
5. How do I access the U-Boot  after restarting the MM910?  

A: Press Ctrl+B

Cupid's question

6. When configuring S1 endpoint mode, which parameters are optional?     

A: USERPLANEPEER

    
Donner's question

7. In which network element is the QOS information of the dedicated bearer signed?  

A: PCRF

 
Blitzen's question

8. Is it possible that Eth-trunk member interfaces use the different Ethernet types?  

A: No

 
Olive's question

9. While destination NAT is configured on an interface where the IPSec policy group applies, will the NAT or the IPSec encapsulation be performed first?

A: NAT

Rudolph's question

10. If VLAN 1 is configured as both the management VLAN and service VLAN, what should be configured on the switch interface which connects to the AP, so that the STAs could get the IP address from the DHCP service?

A: PVID