help ap5130dn web configuration

Hello@gionny,
Before logging in to an AP through the web platform, connect a terminal to the AP using an Ethernet cable or in wireless mode to ensure that they are reachable to each other. Then you can log in to the AP using a browser. The IP address, user name, and password https://support.huawei.com/hedex/hdx.do?docid=EDOC1100096145&id=EN-US_XTASK_0176920331&lang=en
The ap-mode-switch command obtains the system software file from the AP backup area to switch AP running mode. AP5130DN does not support this command.Glad to help you! Any further questions, let us know.

I connected the pc with ap5130dn but I can only access through putty ssh with address 169.254.1.1 and not through the web.
How can I enable Web access?
thanks, the version is
<Huawei>display version
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.160 (AP5130DN FIT V200R006C10SPC600)
Copyright (C) 2011-2016 HUAWEI TECH CO., LTD
Huawei AP5130DN Router uptime is 0 week, 0 day, 0 hour, 15 minutes

MPU 0(Master) : uptime is 0 week, 0 day, 0 hour, 15 minutes
SDRAM Memory Size : 256 M bytes
th

You can connect a PC to any network port on an AP or a network port on a switch reachable to the AP (IP addresses of the PC and AP on the same network segment)

IP address:169.254.1.1

User name: admin

Password:admin@huawei.com

Please check the operating system and browser version supported by the web precautions for using the web platform:

https://support.huawei.com/hedex/hdx.do?docid=EDOC1100096145&id=EN-US_CONCEPT_0176920335&lang=en

Hi,

Your AP is FIT,  to use the web, you need to change it to FAT.

Please perform the following operations to switch the mode:

Switching the AP5130DN to a Fat AP

                               Step 1     Configure an FTP server, and ensure that the upgrade software package has been saved to the FTP directory.

                               Step 2     Check the current AP mode and version.

<Huawei> display version
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.160 (AP5130DN FIT V200R007C10
Copyright (C) 2011-2016 HUAWEI TECH CO., LTD
Huawei AP5130DN Router uptime is 0 week, 0 day, 0 hour, 16 minutes
 
MPU 0(Master) : uptime is 0 week, 0 day, 0 hour, 16 minutesSDRAM Memory Size  : 256   M bytesFlash Memory Size  : 32   M bytesMPU version information :1. PCB   Version : H85D2TT1D300 VER.A2. MAB   Version : 03. Board  Type   : AP5130DN4. BootROM Version : 377<Huawei> system-view 
[Huawei] ap-mode-switch prepare
[Huawei] ap-mode-switch check
Info: Ap-mode-switch check ok.

                               Step 3     Upgrade the AP using FTP mode.

 

Do not power of the AP or disconnect the network during the upgrade.

 

[Huawei] ap-mode-switch ftp FatAP5X30XN_V200R008C10.bin 192.168.10.11 admin admin123 Warning: Do Not Power-off.........
Info: Upgrade upgrade-assistant-package successfully!
Warning: System will reboot, if you want to switch to upgrade-assistant-package.
 Are you sure to execute these operations ? [Y/N]: y

                               Step 4     Wait for the AP to restart and upgrade.

                               Step 5     Log in to the AC again and run the display version command to verify that the AP version is successfully upgraded.

<Huawei> display version
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.160 (AP5130DN FAT V200R008C10)
Copyright (C) 2011-2016 HUAWEI TECH CO., LTD
Huawei AP5130DN Router uptime is 0 week, 0 day, 0 hour, 16 minutes
 
MPU 0(Master) : uptime is 0 week, 0 day, 0 hour, 16 minutesSDRAM Memory Size  : 256   M bytesFlash Memory Size  : 32   M bytesMPU version information :1. PCB   Version : H85D2TT1D300 VER.A2. MAB   Version : 03. Board  Type   : AP5130DN4. BootROM Version : 532

Your version is too old, there is no FAT AP version available, you need to upgrade the AP first.

Software download address:

https://support.huawei.com/enterprise/en/wlan/ap5000-pid-22039835/software/

the firmware you need is this (AP5130DN-V200R006C20SPC800.zip ), true only that it does not let me download. Can anyone help me?
To obtain permissions, perform the following steps:



Customers:Register a product or contract, and obtain permissions to access or download the product.

Partners:Associate your company, and obtain the approval by the administrator of your company. Permissions are granted depending on the certification level of your company.

A good question and the most wonderful answers have really benefited

Hope you can share the solution

Help?