Hello all,
This document describes how to use the health check function of SmartKit to perform inspection and information collection and collect the results.
Step 1 Download and install the latest SmartKit.
Link: https://support.huawei.com/enterprise/en/tool/smartkit-TL1000000026
![]()
Step 2 Open SmartKit and choose Home > Storage > Health Check.
The Health Check page is displayed.
![]()
Step 3 Choose Device Selection > Add Device. Enter the storage system's IP address and login information to add the storage system to the device list.
![]()
![]()
![]()
Step 4 Click Inspection and then click Next.
![]()
![]()
Step 5 After the inspection is complete, click Open the result directory to obtain the inspection result. Then, click Finishto close the window.
![]()
Step 6 Click Information Collection, select the target device, and click Collect Information.
![]()
![]()
Step 7 After the information is collected,click Open Directory to obtain the collected information.
![]()
Step 8 Close the Information Collection window.
----End----
Thanks.
