On the network shown in the following figure, the administrator wants Router A to use static routes to send packets to Router B priority through G0/0/1. Which command can be used to meet this requirement? https://www.freecram.com/uploads/H12-211-ENU/9a04b6a4de3ed0751247f96c9e2249d0.jpg
A. ip route-static 10.0.2.2 255.255.255.255 10.0.12.2 ip route-static 10.0.2.2 255.255.255.255 10.0.21.2 preference 40
B. ip route-static 10.0.2.2 255.255.255.255 10.0.12.2 ip route-static 10.0.2.2 255.255.255.255 10.0.21.2
C. ip route-static 10.0.2.2 255.255.255.255 10.0.12.2 ip route-static 10.0.2.2 255.255.255.255 10.0.21.2 preference 70
D. ip route-static 10.0.2.2 255.255.255.255 10.0.12.2 preference 70 ip route-static 10.0.2.2 255.255.255.255 10.0.21.2
If no preference is set for a static route, the static route uses the default preference of 60. To influence G0/0/1 over G0/0/2, the static route pointing to 10.0.21.2 needs to have a preference higher than 60.
If no preference is set for a static route, the static route uses the default preference of 60. To influence G0/0/1 over G0/0/2, the static route pointing to 10.0.21.2 needs to have a preference higher than 60.
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
Politically sensitive content
Content concerning pornography, gambling, and drug abuse
Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."