H13-523 HCNP-Cloud-FCDS Mock Exam

1.(T or F) In the Huawei FusionCloud Desktop Solution, SVN devices provide both vLB and vAG functions.

2.(Single Answer) Which of the following is not a FusionAccess component?
      A. ITA       B. HDC       C. WI       D. VRM

3.(Single Answer) In the Huawei FusionCloud Desktop Solution, which have higher requirements on storage, full memory VMs or linked clone VMs?
      A. Full memory VMs
      B. Linked clone VMs
      C. Full memory VMs and linked clone VMs have the same requirements on storage.
      D. All of the above

4.(T or F) In the Huawei FusionCloud Desktop Solution, VMs can be logged in to through an emergency channel after the AD is faulty.

5.(Single Answer) Which is the maximum resolution supported by hardware clients?
      A. 1280 x 1024       B. 1366 x 768       C. 1400 x 1050       D. 1280 x 768

6.(T or F) FusionAccess can restrict the frame rate of video playback based on the network bandwidth by setting policies.

7.(Multiple Answer) Which of the following are AOS (ARM) series TCs?
      A. CT3000       B. CT3100       C. CT5000       D. CT6000

8.(T or F) In the Huawei FusionCloud Desktop Solution, the DHCP relay does not need to be configured on a switch if the IP addresses of VMs and a DHCP server are in the same network segment.

9.(T or F) In the Huawei FusionCloud Desktop Solution, USB redirection works at the application layer and supports big data transmission.

10.(T or F) Multiple HDC/WI components can be added on the FusionAccess portal.

11.(Multiple Answer) Which of the following statements about VM provisioning are true?
      A. Full copy and QuickPrep VMs provide consistent experience for end users.
      B. A full copy or QuickPrep template can be modified for at most three times.
      C. Linked clone VMs apply to scenarios with few personalized data, such as meeting rooms.
      D. In Single User mode, the VM assigned to user A can be assigned to user B after unassigning it from user A.

12.(Multiple Answer) Which of the following management nodes work in active/standby mode?
      A. HDC       B. WI       C. ITA       D. DB

13.(T or F) VMs in a linked clone VM group share a system disk and feature quick creation and easy software update.

14.(Multiple Answer) In the Huawei FusionCloud Desktop Solution, you need to configure domain name resolution on the DNS for which of the following components?
      A. vLB       B. ITA       C. vAG       D. HDC

15.(Single Answer) Which of the following functions is not supported by the Microsoft Group Policy Management Console (GPMC)?
      A. Back up group policies.
      B. Modify group policies.
      C. Use GPResult to test group policies.
      D. Configure group policies for forests.

16.(Single Answer) You need to configure and maintain the desktop cloud on which portal?
      A. FusionManager       B. FusionAccess       C. FusionCompute       D. FusionStorage

17.(Multiple Answer) Which of the following methods can be used to improve the reliability of management nodes?
      A. Key nodes are independent of Microsoft products. The HDC does not depend on domain control or Windows Communication Foundation (WCF).
      B. Redundant management nodes are configured.
      C. The memory, CPU, and hard disk status of management nodes is automatically monitored.
      D. The service layer status is detected, and faults automatically recover.

18.(Single Answer) During desktop configuration on the FusionAccess portal, what can you do if desktop components cannot be connected?
      A. Enter the correct database username and password, and configure desktops again.
      B. Check whether the HDC status is normal. If yes, wait 5 m      inutes and perform operations again. If no, rectify the HDC.
      C. Check whether a correct HDC version is installed.
      D. Check whether the license service is normal.

19.(Multiple Answer) Which are the possible causes if the VM list fails to be obtained?
      A. The WI is faulty.       B. The AD is faulty.
      C. The HDC is faulty.       D. The GaussDB is faulty.

20.(T or F) When powering off the desktop cloud environment, you need to shut down FusionCompute management nodes first and then shut down FusionAccess management nodes.