GTMU OVER IP
using SMT software
To be apply to connect to the GTMU using SMT ,, Set the IP address of the SMT PC to
192.168.0.xx , , where xx is not equal to 72
1-Open SMT , Press site management Right Press Get

2- choose ip over FE Config
On Config IP Tap adjust (static IP status , BTS IP , BTS IP Mask , BSC IP , BSC IP MASK , Vlan flag & Vlan
IP)Than Press config Para

3-Config Router Tap
Adjust (DST IP = BSC IP , Gateway= BTS forword IP , DST IP MASK )
Then press add then press Config Para

4-config port ip

5-choose Reset Site Hierarchally
Reset LeveL (third level Reset )
Reset Port ( Not select )



