Got it

gphf, gpbd, gpfd and gpuf boards

Created: May 11, 2021 11:43:41Latest reply: May 11, 2021 11:59:41 507 2 0 0 0
  HiCoins as reward: 0 (problem unresolved)

Hi, there.


I want to know what are the differences between the GPHF, GPBD, GPFD, and GPUF boards.

Can they be installed on the same device, such as the MA5800? 

Could you give me the details of the board, please?

Thanks.

Featured Answers

Recommended answer

Nino_Chou
Admin Created May 11, 2021 11:59:41

Hi, friend.


Generally, the MA5600T, MA5603T, and MA5608T use the GPBD and GPFD boards, whereas the MA5800 uses the GPHF and GPUF boards. You can find the differences in the following two tables:


Table 1.  GPBD&GPFD

SpecificationH805GPBDH802GPFD/H805GPFD/H806GPFD
Port   quantity816
MAX   Split ratio (Class B+)1:641:64
MAX   Split ratio (Class C+/Class C++)1:1281:128
ONU-based   shapingYesYes
Optical   performance monitorYesYes
Controlled   optical signal transmission of the optical moduleYesYes
ONU-based   rate limitationYesYes
CAR   groupYesYes
Temperature   query and high-temperature alarmYesYes
Automatic   power shutdown in case of a high temperatureYesYes
Maximum   differential fiber distance (km)4040
Maximum   Number of Service Flows Supported by the Board163688184
Maximum   Number of MAC address Supported by the Board3276816384
Available   DBA bandwidth (based on single port) (kbit/s)12387841238784
Number   of T-CONT supported by each GPON port10241024
Board   supporting downstream FECYesYes
Board   supporting upstream FECYesYes
Rogue   ONT detectionYesYes
Number   of ONUs supported by a GPON port128128
Number   of GEM ports supported by each board163848192
Number   of GEM ports supported by each GPON port38723872
Number   of service ports supported by each GEM port81848184
HQoS   (four levels)
  • H802GPFD: No 

  • H805GPFD/H806GPFD: Yes

  • H806GPBH: No

  • H807GPBH: Yes

9216-byte   Jumbo frames
  • H802GPFD: No

  • H805GPFD/H806GPFD: Yes

  • H802GPFD: No


  • H805GPFD/H806GPFD: Yes

1588v2YesYes
Power   budget supported by a GPON port
  • Class B+ (28 dB,   mostly used)

  • Class C+ (32 dB long reach transmission)

  • Class C++: 35 dB

Minimum   bandwidth supported by a T-CONT
  • 1 Mbit/s (in the   minimum delay mode)

  • 128 kbit/s (in the maximum bandwidth usage mode)


Table 2.  GPHF&GPUF

SpecificationH901GPHF/H902GPHF/H903GPHFH901GPUF/H902GPUF
Application   ScenarioFTTC/B/D,FTTH,FTTO/FTTMFTTC/B/D,FTTH,FTTO/FTTM
Port   quantity1616
Forwarding   performance40 Gbit/s40 Gbit/s
Port   rate
  • Upstream: 1.244 Gbit/s

  • Downlink: 2.488 Gbit/s

  • Upstream: 1.244 Gbit/s

  • Downlink: 2.488 Gbit/s

Maximum   split ratio1:1281:128
Optical   Module Lighting ControlYesYes
ONU-based   shapingYesYes
Temperature   query and high-temperature alarmYesYes
High-temperature automatic shutdownYesYes
Service   board energy savingYesYes
Maximum   distance difference between two ONUs connected to the same PON port and the   PON port (board capability)40km40km
Number   of MAC Addresses13107232768
Downlink   FECYesYes
Uplink   FECYesYes
Rogue   ONT detection and isolationYesYes
Configurable   guaranteed bandwidth per port1238784 kbit/s1238784 kbit/s
Number   of T-CONTs supported by each GPON port10241024
Maximum   number of ONUs supported by each GPON port128128
Number   of GEM ports supported by each board1638416384
Number   of GEM ports supported by each GPON port38723872
Maximum   number of service flows supported by a board1636816368
9K Jumbo   frameYesNo
Routes/ARP196608196608
1588v2YesYes
NTPYesYes
HQoSYesNo
Security   feature (Anti-DOS, Anti-MAC/IP Spoofing)YesYes
Y.1731   PMYesYes
PON ISSUYesNo
GPON   Type B Protection (Single-Homing)YesYes
GPON   Type B Protection (Dual-Homing)YesNo
GPON   Type C Protection (Single-Homing)YesYes
GPON   Type C Protection (Dual-Homing)YesNo
Optical   power budget supported by GPON ports
  • Class B+: 28 dB, most   commonly used

  • Class C+: 32 dB, long-haul transmission

  • CLASS C++:35dB

Minimum   bandwidth of each T-CONT
  • Minimum bandwidth-delay mode: 1 Mbit/s

  • Maximum bandwidth usage mode: 128 kbit/s


Thanks.

View more
  • x
  • convention:

All Answers
Hello, friend!
It's nice to meet you in the community.
We're working on getting the right answer for you.
View more
  • x
  • convention:

Hi, friend.


Generally, the MA5600T, MA5603T, and MA5608T use the GPBD and GPFD boards, whereas the MA5800 uses the GPHF and GPUF boards. You can find the differences in the following two tables:


Table 1.  GPBD&GPFD

SpecificationH805GPBDH802GPFD/H805GPFD/H806GPFD
Port   quantity816
MAX   Split ratio (Class B+)1:641:64
MAX   Split ratio (Class C+/Class C++)1:1281:128
ONU-based   shapingYesYes
Optical   performance monitorYesYes
Controlled   optical signal transmission of the optical moduleYesYes
ONU-based   rate limitationYesYes
CAR   groupYesYes
Temperature   query and high-temperature alarmYesYes
Automatic   power shutdown in case of a high temperatureYesYes
Maximum   differential fiber distance (km)4040
Maximum   Number of Service Flows Supported by the Board163688184
Maximum   Number of MAC address Supported by the Board3276816384
Available   DBA bandwidth (based on single port) (kbit/s)12387841238784
Number   of T-CONT supported by each GPON port10241024
Board   supporting downstream FECYesYes
Board   supporting upstream FECYesYes
Rogue   ONT detectionYesYes
Number   of ONUs supported by a GPON port128128
Number   of GEM ports supported by each board163848192
Number   of GEM ports supported by each GPON port38723872
Number   of service ports supported by each GEM port81848184
HQoS   (four levels)
  • H802GPFD: No 

  • H805GPFD/H806GPFD: Yes

  • H806GPBH: No

  • H807GPBH: Yes

9216-byte   Jumbo frames
  • H802GPFD: No

  • H805GPFD/H806GPFD: Yes

  • H802GPFD: No


  • H805GPFD/H806GPFD: Yes

1588v2YesYes
Power   budget supported by a GPON port
  • Class B+ (28 dB,   mostly used)

  • Class C+ (32 dB long reach transmission)

  • Class C++: 35 dB

Minimum   bandwidth supported by a T-CONT
  • 1 Mbit/s (in the   minimum delay mode)

  • 128 kbit/s (in the maximum bandwidth usage mode)


Table 2.  GPHF&GPUF

SpecificationH901GPHF/H902GPHF/H903GPHFH901GPUF/H902GPUF
Application   ScenarioFTTC/B/D,FTTH,FTTO/FTTMFTTC/B/D,FTTH,FTTO/FTTM
Port   quantity1616
Forwarding   performance40 Gbit/s40 Gbit/s
Port   rate
  • Upstream: 1.244 Gbit/s

  • Downlink: 2.488 Gbit/s

  • Upstream: 1.244 Gbit/s

  • Downlink: 2.488 Gbit/s

Maximum   split ratio1:1281:128
Optical   Module Lighting ControlYesYes
ONU-based   shapingYesYes
Temperature   query and high-temperature alarmYesYes
High-temperature automatic shutdownYesYes
Service   board energy savingYesYes
Maximum   distance difference between two ONUs connected to the same PON port and the   PON port (board capability)40km40km
Number   of MAC Addresses13107232768
Downlink   FECYesYes
Uplink   FECYesYes
Rogue   ONT detection and isolationYesYes
Configurable   guaranteed bandwidth per port1238784 kbit/s1238784 kbit/s
Number   of T-CONTs supported by each GPON port10241024
Maximum   number of ONUs supported by each GPON port128128
Number   of GEM ports supported by each board1638416384
Number   of GEM ports supported by each GPON port38723872
Maximum   number of service flows supported by a board1636816368
9K Jumbo   frameYesNo
Routes/ARP196608196608
1588v2YesYes
NTPYesYes
HQoSYesNo
Security   feature (Anti-DOS, Anti-MAC/IP Spoofing)YesYes
Y.1731   PMYesYes
PON ISSUYesNo
GPON   Type B Protection (Single-Homing)YesYes
GPON   Type B Protection (Dual-Homing)YesNo
GPON   Type C Protection (Single-Homing)YesYes
GPON   Type C Protection (Dual-Homing)YesNo
Optical   power budget supported by GPON ports
  • Class B+: 28 dB, most   commonly used

  • Class C+: 32 dB, long-haul transmission

  • CLASS C++:35dB

Minimum   bandwidth of each T-CONT
  • Minimum bandwidth-delay mode: 1 Mbit/s

  • Maximum bandwidth usage mode: 128 kbit/s


Thanks.

View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.