Hello everyone,
Today I will share with you how to delete member interfaces from an Eth-Trunk.
1. Run the shutdown command on the interface view to configure the member interface to be deleted in the Downstate.
2. Run either of the following commands to delete the member interface from the Eth-Trunk:
• Run the undo eth-trunk trunk-id command in the interface view.
• Run the undo trunkport interface-type { interface-number1 [ to interface-number2 ] } &<1-8> command on the Eth-Trunk interface view.
3. Run the undo shutdown command on the interface view to enable the member interfaces.
That is all I want to share with you! Thank you!
