FusionSolar Not Showing Exported Energy
Created: Jan 6, 2022 12:44:17Latest reply: Jan 7, 2022 01:21:11
287
4
1
0
0
HiCoins as reward：
0
(problem unresolved)
- x
- convention：
- Emotion(0)
Featured Answers
|
Hello, friend. You can log in to the inverter by scanning the inverter QR code on the FusionSolar app for local commissioning. Click Maintain and add your device. In addition, you can refer to the following link to check whether the cable connection is correct. Connect DTSU666-H to SUN2000 50-60KTL-M0 inverter
|
|
All Answers
|
Hello, friend. You can log in to the inverter by scanning the inverter QR code on the FusionSolar app for local commissioning. Click Maintain and add your device. In addition, you can refer to the following link to check whether the cable connection is correct. Connect DTSU666-H to SUN2000 50-60KTL-M0 inverter
|
|
Posted by SilviuRoman at 2022-01-06 14:57 Thank you for your help! The RS485 pins on invertor com connector for SUN2000-3KTL-M0 are 5 and 7? I ... Hello, friend. @SilviuRoman As you can see from the following picture, your inverter should be plugged in 7 and 9.
|
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
