Fusionsolar not registering export power in export management

Hello,benkad
It's nice to meet you in the community.
We're working on your problem. Please be patient.

Hello, benkad
You can check your exit settings and whether the device's communication interface is loose. I will also give feedback to photovoltaic engineers to see if it is a software bug.
Thanks！

Hi, Thank you for your reply. The communication is OK, I receive all the data correctly, I do not understand what exit settings should I check? Generally everything is just fine except for the export energy management presentation and calculation of the export energy.

HI,
You didn't have export the 7th, so it's 0%.
The real-time power is different.
So,it is Normal

Hi, benkad.
Part of the picture shows the power. It's real-time. It shows you're currently powering the grid. The following section shows the daily production of electricity, indicating that all the electricity generated on April 7 was used by you and not supplied to the power grid.
Thanks！

it is different Energy yield to real-time

Hi, I can not understand your explanation. From the graph for the 7th the part marked with the circle, it is clearly that the system has produced more than the consumption, according to you, what happened to that energy?

Hi, This would be correct in case of net metering system where the excess electricity exported and then consumed (imported) within 24 hours is considered as self-consumed. Unfortunately this is not the case in our country we have feed in tariff. The electricity distributor measures the export and the import of electricity separately. Within 24 hours, for the electricity consumed the price charged is 70 Euro per MWh, for the electricity delivered to the grid (exported) the price paid is 40 Euro per MWh. Therefore I think that two options for the system should be available in the application, one for net metering and other for feed in tariff system.