Got it

FusionCube for (Virtualization) 6.0

Created: Feb 22, 2022 18:16:15Latest reply: Feb 23, 2022 08:49:17 306 6 0 0 0
  HiCoins as reward: 0 (problem unresolved)

Hello, i am not clear on how to start Software Installation of FusionCube(Virtualization) 6.0, how i will change ip address, how to add servers to fusioncube builder. can anyone brief me on this points.

  • x
  • convention:

Featured Answers
olive.zhao
Admin Created Feb 23, 2022 03:57:25

Posted by DANIH at 2022-02-23 03:34 @olive.zhao, thank you but i am not clear about the cable connection when we use 2288H V5 server.w ...

Hello, 

Locate the ports on a 2288H V5 server.

Each 2288H V5 server that is used as an MCNA/SCNA/CNA/SNA/DBN provides one BMC Mgmt port and four 10GE ports.

Note:

  • Ports SFP+1 and SFP+2 are bonded in active/standby mode by default to serve as the management and service plane.

  • Ports SFP+3 and SFP+4 are bonded in active/standby mode by default to serve as the storage plane.

  • Flexible networking configuration is supported. For example, ports SFP+1 and SFP+3 are bonded. The network port bonding configuration can be modified during initial configuration. During the configuration, only NIC bonding members can be modified. The bonding mode cannot be modified.

  • The following examples are for reference only. Use the actual network port numbers during deployment.

Figure 2 Ports

Ports

For details, see 10GE Networking (Rack Servers).

Hope this helps!


View more
  • x
  • convention:

Saqibaz
Saqibaz Created Feb 23, 2022 08:49:09 (0) (0)
 
All Answers
ariase88
ariase88 Admin Created Feb 22, 2022 18:24:12

Thanks for contacting the Huawei community!

We are checking your question and will provide an answer to you shortly...
View more
  • x
  • convention:

olive.zhao
olive.zhao Admin Created Feb 23, 2022 00:53:38

Hello, friend!

If you want to install FuisonCube 6.0, please see FusionCube Product Documentation (FusionSphere).

In addition, we have a simulator for installing and configuring FusionCube. You can learn operations and study on the simulator. For details, see FusionCube Center(FusionSphere).

FusionCube center

Hope this helps!

View more
  • x
  • convention:

DANIH
DANIH Created Feb 23, 2022 03:34:25

Posted by olive.zhao at 2022-02-23 00:53 Hello, friend!If you want to install FuisonCube 6.0, please see FusionCube Product Documentation (F ...
@olive.zhao, thank you but i am not clear about the cable connection when we use 2288H V5 server.
which port to use for management ip, service ip and storage ip.
documentation says management and service use same port. can you clarify for me.
View more
  • x
  • convention:

olive.zhao
olive.zhao Admin Created Feb 23, 2022 03:57:25

Posted by DANIH at 2022-02-23 03:34 @olive.zhao, thank you but i am not clear about the cable connection when we use 2288H V5 server.w ...

Hello, 

Locate the ports on a 2288H V5 server.

Each 2288H V5 server that is used as an MCNA/SCNA/CNA/SNA/DBN provides one BMC Mgmt port and four 10GE ports.

Note:

  • Ports SFP+1 and SFP+2 are bonded in active/standby mode by default to serve as the management and service plane.

  • Ports SFP+3 and SFP+4 are bonded in active/standby mode by default to serve as the storage plane.

  • Flexible networking configuration is supported. For example, ports SFP+1 and SFP+3 are bonded. The network port bonding configuration can be modified during initial configuration. During the configuration, only NIC bonding members can be modified. The bonding mode cannot be modified.

  • The following examples are for reference only. Use the actual network port numbers during deployment.

Figure 2 Ports

Ports

For details, see 10GE Networking (Rack Servers).

Hope this helps!


View more
  • x
  • convention:

Saqibaz
Saqibaz Created Feb 23, 2022 08:49:09 (0) (0)
 
Saqibaz
Saqibaz Created Feb 23, 2022 08:49:17

Thanks for sharing
View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.
Information Protection Guide
Thanks for using Huawei Enterprise Support Community! We will help you learn how we collect, use, store and share your personal information and the rights you have in accordance with Privacy Policy and User Agreement.