Hello all,
Have a good day. This post is talking about the solution of FusionCube 1000.
As companies go global, remote offices and branch offices (ROBOs) are gaining importance and affecting company revenues. However, IT solutions for such remote sites face the following challenges:
Lack of standardization: There are various types and quantities of devices with low integration. It is difficult to manage these devices.
Long deployment cycle: It usually takes 30 days to deploy a site.
High O&M cost: Requirements on skills of personnel at remote sites are high.
To address the preceding challenges, Huawei introduces FusionCube 1000. In conjunction with the FCV platform, this solution offers integrated cabinets, service rollout, O&M management, and troubleshooting services in a centralized manner. It greatly shortens the deployment cycle, reduces the O&M cost, and improves the private line utilization. Figure 1 shows the structure of FusionCube 1000.
Figure 1 FusionCube 1000
Highlights
The highlights of FusionCube 1000 are as follows:
Scenario-specific standardization
Remote sites and services are standardized.
Standard cabinets, hardware, software, cabling, and configurations are provided.
Integrated cabinet
Software replaces hardware.
The uninterruptible power system (UPS), batteries, servers, storage devices, and network devices are simplified and integrated into a cabinet.
Lifecycle management
Remote sites are discovered and deployed.
Remote sites are monitored and managed in a centralized manner, reducing onsite O&M costs.
Software-defined architecture
Software-defined remote sites are rolled out using templates.
New services are added flexibly.
Thank you.
