FusionAccess V601 ErrorCode 6049

qwert · Created May 4, 2017 14:55:24

chech whether the client can connect the tcp port 28511/28512 of VM.
From a physical PC which is a same subnet with the client, run command to test:
telnet 192.168.1.10 28511

###192.168.1.10 is the IP fo VM , 28511 is port to test.

qwert · Created May 4, 2017 14:55:24

chech whether the client can connect the tcp port 28511/28512 of VM.
From a physical PC which is a same subnet with the client, run command to test:
telnet 192.168.1.10 28511

###192.168.1.10 is the IP fo VM , 28511 is port to test.

Katrina · Created May 5, 2017 00:51:40

Check the network between the client and the virtual machine or the vag.
If the vag one-way authentication is enabled, check that the client's vag certificate is correct.

Rating

Number of participants 1	E-coins +3	Collapse Reasons
社区管理员咕噜噜	+ 3	Good!

View All scores

FusionAccess V601 ErrorCode 6049

Best answer

Rating

Third Party’s Trade Secret

`@trans`drinking_poetry`~trans`

My Followers

Enterprise

Consumer

Corporate

Carriers

FusionAccess V601 ErrorCode 6049

Best answer

Rating

Third Party’s Trade Secret

`@trans`drinking_poetry`~trans`

My Followers