Got it
Huawei Enterprise Support Community
Community Forums Access Network
FTTH E2E Configuration Qu...

FTTH E2E Configuration Query Through CLI(IPTV) Highlighted

Latest reply: Dec 10, 2019 06:51:07 3764 8 8 0 1
View the author 1#

Hello, everyone!


FTTH E2E services include IPTV, HSI, and VoIP, where the IPTV and HSI services are configured on OLTs, the VoIP service configuration on the OLT is the same as the broadband service configuration (using different profile parameters), and the voice configuration is issued to ONTs through the U2000. The configuration difference for the IPTV service between FTTH and FTTB is that multicast users are configured on OLTs. For details about how to query the configurations, see the description for querying FTTB IPTV service configurations. This section describes how to query FTTH broadband service configurations (querying service flows is omitted).

Commands for querying FTTH HSI service configurations:


1. Query ONT information in PON profile mode.
MA5600T(config-if-gpon-0/3 )#display ont info portid  ontid
2. Query ONT configurations.
MA5600T(config)# display current-configuration ont  f/s/p ontid
3. Query the line profile and service profile of the ONT.
MA5600T(config)# display ont-srvprofile gpon/epon  profile-id profile-id
MA5600T(config)# display ont-lineprofile gpon/epon profile-id profile-id
4. Query the DBA profile of the ONT.
MA5600T(config)# display dba-profile  profile-id profile-id

 

1


FTTB E2E service configurations need to be queried on the OLT and MxU. For the broadband and voice services, only service channels are created between the OLT and the MxU, which can be queried by running the display service-port command. This section describes how to query the configurations of the FTTB voice and multicast services. For details about how to que****roadband services, see the description for querying FTTH E2E service configurations.

Commands for querying IPTV service configurations on the OLT:


1. Query multicast programs in the VLAN
MA5600T(config)# display igmp program  vlan  vlanid
2. Query global multicast configurations.
MA5600T(config)# display igmp config global
3. Query multicast uplink ports.
MA5600T(config)#display igmp uplink-port all
4. Query the mode and version of the multicast VLAN.
MA5600T(config)# display igmp config vlan { all | vlanid }
5. Query multicast cascading ports in BTV mode.
MA5600T(config-btv)# display igmp cascade-port { all | frameid/slotid/portid }

 

2

 

FTTB E2E services are configured on the MxU, which can be queried by running the display service-port command.
Commands for querying multicast configurations on the MxU:

 

1. Query a multicast user.
MA5616 (config)# display igmp user
2. Query multicast users in a multicast VLAN.
MA5616(config)# display igmp multicast-vlan member vlan vlanid
3. Query global multicast configurations, uplink port, and multicast mode. The multicast version query command is the same as that used on the OTL. For details, see steps 2 through 4. Examples are not provided.
4. Query the mode and version of the multicast VLAN.
MA5600T(config)# display igmp config vlan { all | vlanid }

 

3

 

[Note]:
Both the OLT and MxU can authenticate multicast users. To do so, run the igmp user bind-profile command to bind the authentication profile to the user. This profile can be queried by running the display igmp profile command.
Multicast users can be configured on the OLT but the maximum number of programs that can be ordered by the user is limited.


Thanks.

OLT SeriesFTTx Configuration

This article contains more resources

You need to log in to download or view. No account? Register

x

Like (8) Dislike (0) Favorite(1) Share Report
Previous: Q&A: MA5600T-how to make a QinQ configuration
Next: How to configure tones in MA5600T CLI ?
(0) (0)
2#
yjhd
Created Nov 5, 2018 08:06:58

FTTB E2E service configurations need to be queried on the OLT and MxU. For the broadband and voice services, only service channels are created between the OLT and the MxU, which can be queried by running the display service-port command. This section describes how to query the configurations of the FTTB voice and multicast services. For details about how to que****roadband services, see the description for querying FTTH E2E service configurations.
View more
  • x
  • convention：
(0) (0)
3#
yjhd
Created Nov 6, 2018 08:02:56

Both the OLT and MxU can authenticate multicast users. To do so, run the igmp user bind-profile command to bind the authentication profile to the user. This profile can be queried by running the display igmp profile command.
Multicast users can be configured on the OLT but the maximum number of programs that can be ordered by the user is limited
View more
  • x
  • convention：
(0) (0)
4#
Mark.hu
Created Nov 6, 2018 08:09:47

The voice configuration is issued to ONTs through the U2000. The configuration difference for the IPTV service between FTTH and FTTB is that multicast users are configured on OLTs. This section describes how to query the configurations of the FTTB voice and multicast services. For details about how to que****roadband services, see the description for querying FTTH E2E service configurations
View more
  • x
  • convention：
(0) (0)
5#
Torrent
Created Nov 6, 2018 08:10:08


Multicast users can be configured on the OLT but the maximum number of programs that can be ordered by the user is limited.

ok noted! thanks for sharing us such a good exampleFTTH E2E Configuration Query Through CLI(IPTV)-2795921-1
View more
  • x
  • convention：
(0) (0)
6#
Skay
Created Nov 7, 2018 10:00:05

hi author , about noted info :
Both the OLT and MxU can authenticate multicast users. To do so, run the igmp user bind-profile command to bind the authentication profile to the user. This profile can be queried by running the display igmp profile command.
Multicast users can be configured on the OLT but the maximum number of programs that can be ordered by the user is limited.

 

i want to know what is the macimum number ?and what is the effect if Multicase users reached to limit .
View more
  • x
  • convention：
(0) (0)
7#
No.9527
Created Nov 8, 2018 08:27:13

Although traditional fixed-line carriers have sufficient DSL copper cable resources, copper cables provide limited bandwidths. Because upgrades to very-high-data-rate digital subscriber line (VDSL) have strict limitations on copper cable quality and distance, copper cables' bandwidths are difficult to expand. Deploying fiber to the home (FTTH) consumes high costs and has a long investment period. In some developed countries, the last mile regulations and forcible policy opening may cause fixed-line carriers to fail to obtain returns from FTTH investments. How to increase the last mile's access bandwidth becomes an urgent issue for fixed-line carriers.

Generally, mobile networks have sufficient bandwidths and their deploy efficiency is much higher than fixed networks. Fixed-line carriers have sufficient equipment room and site resources. Huawei xDSL/LTE Hybrid Access solution can bind DSL and LTE bandwidths to provide flexible-charging and high-bandwidth service packages for users and enhance carriers' competitive edge.
View more
  • x
  • convention：
(0) (0)
8#
littlestone
Created Nov 26, 2018 14:38:45

VoIP service configuration on OLT is the same as broadband service configuration (using different configuration file parameters), and voice configuration is published to ONT through U2000. The difference in IPTV service configuration between FTTH and FTTB is that multicast users are configured on OLT.
View more
  • x
  • convention：
(0) (0)
9#
liqiang185
Admin Created Dec 10, 2019 06:51:07

Click the following links for more information:

https://support.huawei.com/enterprise/en/access-network/smartax-ma5600t-pid-18133
View more
  • x
  • convention：
Back to list

Comment

Advanced
B Color Image Link Quote Code Smilies
You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login
Huawei Website Support About Huawei Privacy User Agreement Terms of Use Cookies Cookie Settings
Huawei Enterprise Huawei Carrier Forum Training & Certification

Contact Us: e_online@huawei.com Copyright © 2022 Huawei Technologies Co., Ltd. All rights reserved.

APP

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.