Hi, friend.
The HG630 is a carrier product. To log in to the ONT and connect to the network, Refer to the following method.
By default, the HG630 works in routing mode. The HG630 starts to set up a dial-up connection automatically after you power it on. You do not need to install any dial-up software or perform any dial-up operations on your computer.
To set up a dial-up connection for Internet access:
Launch a browser on your computer. Enter http://192.168.1.1 in the address box, and press Enter.
On the login page, enter your user name (default is user) and password (default is HuaweiUser).
Click Login.
Click Setup Wizard to display the Wizard tab.
Click Next.
In WAN device, select the type for your device. and then click Next. ADSL or VDSL device, please enter the user name and password that are provided by your service provider in User name and Password text box.
In SSID and WPA pre-shared key, set a wireless network name and password, and then click Next. (The default wireless network name (SSID) and password (WLAN Key) which are printed on the label of the HG630's rear panel are preset before delivery. )
Confirm the information you set and then click Submit. Then check the status of the Internet indicator. When the Internet indicator turns green, you can access the Internet.
The preceding operations need only be performed once. The next time you power on the computer, you can access the Internet without any other configuration
If you still cannot log in, contact your local ISP for assistance.
Thanks.
